# \[Hilo\] How to get network time automatically with \<AT+CTZU\>?

**URL:** <https://forum.sierrawireless.com/t/hilo-how-to-get-network-time-automatically-with-at-ctzu/6567>\
**Category:** HL Series FAQ\
**Created:** [July 23, 2013, 6:20am UTC](https://forum.sierrawireless.com/t/hilo-how-to-get-network-time-automatically-with-at-ctzu/6567 "2013-07-23T06:20:53Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![FAQ\_Poster](https://avatars.discourse-cdn.com/v4/letter/f/f9ae1b/32.png) [@FAQ\_Poster](https://forum.sierrawireless.com/u/FAQ_Poster)\
**Post date:** [July 23, 2013, 6:20am UTC](https://forum.sierrawireless.com/t/hilo-how-to-get-network-time-automatically-with-at-ctzu/6567/1 "2013-07-23T06:20:53Z")

</div>

Answer: The network time feature is also called NITZ. Before using this feature, please make sure your network provider supports this feature.

To enable this feature you have to set \<AT+CTZU=1\>. Then whenever you need the network time, you can get it by \<AT+CCLK?\>.

You can also use command \<AT_PSUTTZ\>, but it is less common. If you set \<AT_PSUTTZ=1\> then there will be the URC of "\*PSUTTZ …” after module startup which contains the network time.

For example:  
AT+CCLK?  
+CCLK: “00/01/01,00:09:31+00”  
AT+CTZU=1 ==\> Enable automatic time zone update via NITZ  
OK  
AT+CCLK?  
+CCLK: “12/01/06,07:51:26+04” ==\>Time is updated

Please you can also refer to 3GPP TS 27.007, 8.39 Automatic Time Zone Update +CTZU for further information.
