# Gsm cell id

**URL:** <https://forum.sierrawireless.com/t/gsm-cell-id/3773>\
**Category:** Legacy AirPrime modules\
**Created:** [October 23, 2009, 5:07am UTC](https://forum.sierrawireless.com/t/gsm-cell-id/3773 "2009-10-23T05:07:44Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![akhil](https://avatars.discourse-cdn.com/v4/letter/a/7ab992/32.png) [@akhil](https://forum.sierrawireless.com/u/akhil)\
**Post date:** [October 23, 2009, 5:07am UTC](https://forum.sierrawireless.com/t/gsm-cell-id/3773/1 "2009-10-23T05:07:44Z")

</div>

hi,  
Is it possible to read gsm cell id,from wavecom module?if so,any pointers regarding it,will be very helpful.

Thanks and Regards.

---

<div class="post-metadata">

**Author:** ![awneil](https://avatars.discourse-cdn.com/v4/letter/a/49beb7/32.png) [@awneil](https://forum.sierrawireless.com/u/awneil)\
**Post date:** [October 23, 2009, 6:29am UTC](https://forum.sierrawireless.com/t/gsm-cell-id/3773/2 "2009-10-23T06:29:53Z")

</div>

AT Commands Manual!

---

<div class="post-metadata">

**Author:** ![JasonDiplomat](https://avatars.discourse-cdn.com/v4/letter/j/71e660/32.png) [@JasonDiplomat](https://forum.sierrawireless.com/u/JasonDiplomat)\
**Post date:** [October 23, 2009, 8:56am UTC](https://forum.sierrawireless.com/t/gsm-cell-id/3773/3 "2009-10-23T08:56:45Z")

</div>

AT+CREG (section 11.2) - you’re interested in the LAC and CI.

You may need to set mode 2 to enable them to be reported as unsolicited notifications.

Also see AT+WLOC (section 11.6) and AT+CCED (section 11.3)

You have to enable the LOCN feature in AT+WFM to allow AT+WLOC to work.