# GPRS Packet Data - Send & Receive

**URL:** <https://forum.sierrawireless.com/t/gprs-packet-data-send-receive/6946>\
**Category:** Legacy AirPrime modules\
**Created:** [January 2, 2014, 10:11am UTC](https://forum.sierrawireless.com/t/gprs-packet-data-send-receive/6946 "2014-01-02T10:11:09Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![lyeflyer](https://avatars.discourse-cdn.com/v4/letter/l/6a8cbe/32.png) [@lyeflyer](https://forum.sierrawireless.com/u/lyeflyer)\
**Post date:** [January 2, 2014, 10:11am UTC](https://forum.sierrawireless.com/t/gprs-packet-data-send-receive/6946/1 "2014-01-02T10:11:09Z")

</div>

Hello, guys.

What are the AT Commands to be used for sending and receiving data after the GPRS Packet Connection is established?

Thanks.

---

<div class="post-metadata">

**Author:** ![lotam](https://avatars.discourse-cdn.com/v4/letter/l/958977/32.png) [@lotam](https://forum.sierrawireless.com/u/lotam)\
**Post date:** [January 3, 2014, 1:16am UTC](https://forum.sierrawireless.com/t/gprs-packet-data-send-receive/6946/2 "2014-01-03T01:16:48Z")

</div>

Hi,

Which module you are using? Q26xx or SL6/SL8?

If so, this internet AT command guide may help, reminded you need to first download and enable WipSoft application in the module.  
[http://developer.sierrawireless.com/Resources/Resources/AirPrime/Software/Internet%20Application%205,-d-,56%20AT%20Commands%20Interface%20Specification.aspx](http://developer.sierrawireless.com/Resources/Resources/AirPrime/Software/Internet%20Application%205,-d-,56%20AT%20Commands%20Interface%20Specification.aspx)

To get that, first, download and install the developer studio  
[http://developer.sierrawireless.com/en/Resources/Resources/AirPrime/Software/Open%20AT%20Application%20Framework.aspx](http://developer.sierrawireless.com/en/Resources/Resources/AirPrime/Software/Open%20AT%20Application%20Framework.aspx)  
A installation video is available at:  
[http://developer.sierrawireless.com/Resources/Resources/AirPrime/Training%20and%20Tutorials/AirPrime%20-%20Developer%20Studio%20Installation%20-%20Video%20Tutorial.aspx](http://developer.sierrawireless.com/Resources/Resources/AirPrime/Training%20and%20Tutorials/AirPrime%20-%20Developer%20Studio%20Installation%20-%20Video%20Tutorial.aspx)

Thx
