# GPIO States

**URL:** <https://forum.sierrawireless.com/t/gpio-states/1956>\
**Category:** Legacy AirPrime modules\
**Created:** [March 2, 2008, 11:37pm UTC](https://forum.sierrawireless.com/t/gpio-states/1956 "2008-03-02T23:37:12Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![ianmceachern](https://avatars.discourse-cdn.com/v4/letter/i/9de053/32.png) [@ianmceachern](https://forum.sierrawireless.com/u/ianmceachern)\
**Post date:** [March 2, 2008, 11:37pm UTC](https://forum.sierrawireless.com/t/gpio-states/1956/1 "2008-03-02T23:37:12Z")

</div>

Hi:

In one of the manuals it says that GPIO states are saved by AT&W.  
It seems that if you configure an IO as an output - this will be retained after power down or reset … however, the output state is not retained.  
Anyone know of a way to get a GR64 to retain the state of an IO set for output through a reset or power cycle?

Ian