# FX30S and GSM Data exchange

**URL:** <https://forum.sierrawireless.com/t/fx30s-and-gsm-data-exchange/18074>\
**Category:** FX30\
**Created:** [October 25, 2019, 12:20pm UTC](https://forum.sierrawireless.com/t/fx30s-and-gsm-data-exchange/18074 "2019-10-25T12:20:17Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![xgaillard](https://avatars.discourse-cdn.com/v4/letter/x/779978/32.png) [@xgaillard](https://forum.sierrawireless.com/u/xgaillard)\
**Post date:** [October 25, 2019, 12:20pm UTC](https://forum.sierrawireless.com/t/fx30s-and-gsm-data-exchange/18074/1 "2019-10-25T12:20:17Z")

</div>

Trying to use FX30S modem for GSM Data exchange and it fails.

Can’t use ATD without ‘;’ at the end of the command. If doing so having NO CARRIER

Using ‘;’ character at the end , the connexion is established but can’t use it to exchange data (still in command mode?). ATO

Trying to call the FX30S modem from a RTC modem, the ATD return BUSY .

Somebody can explain me how to do or what I am doing wrong.

Regards

---

<div class="post-metadata">

**Author:** ![jerdung](https://avatars.discourse-cdn.com/v4/letter/j/82dd89/32.png) [@jerdung](https://forum.sierrawireless.com/u/jerdung)\
**Post date:** [November 19, 2019, 6:38am UTC](https://forum.sierrawireless.com/t/fx30s-and-gsm-data-exchange/18074/2 "2019-11-19T06:38:43Z")

</div>

Hi,  
BUSY is returned in the case data connection is used for other application.  
Please check your SIM status, and the legato application?  
To make a ppp connection, your RTC modem should send ATD_99_\*\*1# (if you are using Verizon network, you should use PDP#3) to FX30S.  
Do not use “;” by the end of ATD command.  
Could you help to reboot and then start ppp from RTC modem?  
Thanks,
