# FX30 Boot On GPIO

**URL:** <https://forum.sierrawireless.com/t/fx30-boot-on-gpio/19880>\
**Category:** FX30\
**Created:** [March 25, 2020, 5:54pm UTC](https://forum.sierrawireless.com/t/fx30-boot-on-gpio/19880 "2020-03-25T17:54:22Z")\
**Posts on this page:** 1\
**Showing post:** 5

<div class="post-metadata">

**Author:** ![david.churchill](https://avatars.discourse-cdn.com/v4/letter/d/ecb155/32.png) [@david.churchill](https://forum.sierrawireless.com/u/david.churchill)\
**Post date:** [March 26, 2020, 11:49am UTC](https://forum.sierrawireless.com/t/fx30-boot-on-gpio/19880/5 "2020-03-26T11:49:41Z")

</div>

jerdung,

Thanks for that, however, I was referencing that document in my original efforts, which was why I’m using GPIO36 in the LEGATO power api command to set the boot source.

I tried using the AT!FWD command but I receive ERROR no matter what command I give (QUERY or CONFIGURE) for any GPIO. The user guide also states that that command, if it did work, is not persistent across reboots, which I would need.

---

_[View the full topic](https://forum.sierrawireless.com/t/fx30-boot-on-gpio/19880)._