# Fresh FX30 not showing up in device manager with drivers

**URL:** <https://forum.sierrawireless.com/t/fresh-fx30-not-showing-up-in-device-manager-with-drivers/30582>\
**Category:** IoT Modules\
**Tags:** driver\
**Created:** [September 8, 2023, 3:02pm UTC](https://forum.sierrawireless.com/t/fresh-fx30-not-showing-up-in-device-manager-with-drivers/30582 "2023-09-08T15:02:41Z")\
**Posts on this page:** 1\
**Showing post:** 19

<div class="post-metadata">

**Author:** ![cchenry](https://avatars.discourse-cdn.com/v4/letter/c/a183cd/32.png) [@cchenry](https://forum.sierrawireless.com/u/cchenry)\
**Post date:** [October 6, 2023, 4:30pm UTC](https://forum.sierrawireless.com/t/fresh-fx30-not-showing-up-in-device-manager-with-drivers/30582/19 "2023-10-06T16:30:57Z")

</div>

@patrick.tipaldo,

Please try this procedure:

> [@\[fx30\] Bricked after AT!RMARESET=OEM (USB device not found)](https://forum.sierrawireless.com/t/fx30-bricked-after-at-rmareset-oem-usb-device-not-found/9589):
>
> Hello, I recently tried to perform a full reset of the FX30, to revert to original setting, using AT!RMARESET=OEM. This command seemed to execute fine, replying OK. However, after reboot, I’m not able to connect to FX30 via USB anymore. It doesn’t apear in windows péripheral manager (no unknon device, and no new COM port when I plug it in). On linux, using dmesg I can’t find any FX30 related messages either. I tried to perform a hardware reset using the reset button (hold it pressed for 10 se…

Regards,  
Chris

---

_[View the full topic](https://forum.sierrawireless.com/t/fresh-fx30-not-showing-up-in-device-manager-with-drivers/30582)._