# File corruption after reset

**URL:** <https://forum.sierrawireless.com/t/file-corruption-after-reset/5786>\
**Category:** Open AT\
**Created:** [August 6, 2012, 6:36am UTC](https://forum.sierrawireless.com/t/file-corruption-after-reset/5786 "2012-08-06T06:36:17Z")\
**Posts on this page:** 10\
**Page:** 1

<div class="post-metadata">

**Author:** ![ljweko](https://avatars.discourse-cdn.com/v4/letter/l/47e85d/32.png) [@ljweko](https://forum.sierrawireless.com/u/ljweko)\
**Post date:** [August 6, 2012, 6:36am UTC](https://forum.sierrawireless.com/t/file-corruption-after-reset/5786/1 "2012-08-06T06:36:17Z")

</div>

I am testing file system sample.

Occasionally the files created got corrupted after reset (at+wdwl, at+cfun or power cycle). File lengths are correct, however the contents become all ones - 0x0ff.

Is this a known issue or am I missing something?

---

<div class="post-metadata">

**Author:** ![Rex\_alex](https://avatars.discourse-cdn.com/v4/letter/r/73ab20/32.png) [@Rex\_alex](https://forum.sierrawireless.com/u/Rex_alex)\
**Post date:** [August 13, 2012, 11:38am UTC](https://forum.sierrawireless.com/t/file-corruption-after-reset/5786/2 "2012-08-13T11:38:48Z")

</div>

Hi,

What is the module and the firmware version you are using(i.e. 7.50 or 7.51) at your end. Also can you please provide the information about exact steps used i.e. how the application is being used with AT commands(can you please provide the AT commands issued).

Does the file get corrupted after one reset or many resets.

Thanks.

---

<div class="post-metadata">

**Author:** ![ljweko](https://avatars.discourse-cdn.com/v4/letter/l/47e85d/32.png) [@ljweko](https://forum.sierrawireless.com/u/ljweko)\
**Post date:** [August 15, 2012, 9:44am UTC](https://forum.sierrawireless.com/t/file-corruption-after-reset/5786/3 "2012-08-15T09:44:07Z")

</div>

Thanks,

I am using FXT009  
Install OS 7.51 using DwlWin  
Set WOPEN=6,1024 and WOPEN=9,1024  
Install file system sample usind DS-2.2.1  
Create file tree by using FS=32 command  
Check contents with FS=8  
Issue command WRST=“000:10” and leave overnight.

This post was ment “is it just me or…”. Seems it is only me. I am currently out of office, but will check issue with other module next week and post result here.

---

<div class="post-metadata">

**Author:** ![multi](https://avatars.discourse-cdn.com/v4/letter/m/d78d45/32.png) [@multi](https://forum.sierrawireless.com/u/multi)\
**Post date:** [April 10, 2013, 2:31pm UTC](https://forum.sierrawireless.com/t/file-corruption-after-reset/5786/4 "2013-04-10T14:31:16Z")

</div>

Hi,

I have the same problem, I got 0xFFs, but it is not related to Reset, sometimes reading the file for the xth time, it becomes corrupted. Not only the file beeing read, others too. File lengths, names, dates are OK.  
File handling is done by sw, not with AT commands.

Thanks

---

<div class="post-metadata">

**Author:** ![ljweko](https://avatars.discourse-cdn.com/v4/letter/l/47e85d/32.png) [@ljweko](https://forum.sierrawireless.com/u/ljweko)\
**Post date:** [April 12, 2013, 6:37am UTC](https://forum.sierrawireless.com/t/file-corruption-after-reset/5786/5 "2013-04-12T06:37:33Z")

</div>

I did check with other device with the same result, file contents were erased.

I’ve shelved 7.51 and file system, waiting for better times.

---

<div class="post-metadata">

**Author:** ![multi](https://avatars.discourse-cdn.com/v4/letter/m/d78d45/32.png) [@multi](https://forum.sierrawireless.com/u/multi)\
**Post date:** [May 8, 2013, 2:16pm UTC](https://forum.sierrawireless.com/t/file-corruption-after-reset/5786/6 "2013-05-08T14:16:08Z")

</div>

Now testing with 7.52…

---

<div class="post-metadata">

**Author:** ![multi](https://avatars.discourse-cdn.com/v4/letter/m/d78d45/32.png) [@multi](https://forum.sierrawireless.com/u/multi)\
**Post date:** [June 12, 2013, 11:36am UTC](https://forum.sierrawireless.com/t/file-corruption-after-reset/5786/7 "2013-06-12T11:36:36Z")

</div>

7.52 solved.

---

<div class="post-metadata">

**Author:** ![gregorbader](https://avatars.discourse-cdn.com/v4/letter/g/51bf81/32.png) [@gregorbader](https://forum.sierrawireless.com/u/gregorbader)\
**Post date:** [June 13, 2013, 9:32am UTC](https://forum.sierrawireless.com/t/file-corruption-after-reset/5786/8 "2013-06-13T09:32:35Z")

</div>

> [@multi](#):
>
> 7.52 solved.

Nice to hear!

Do you have any Release Notes of FW 7.52?

best regards  
Gregor

---

<div class="post-metadata">

**Author:** ![p\_rex](https://avatars.discourse-cdn.com/v4/letter/p/3be4f8/32.png) [@p\_rex](https://forum.sierrawireless.com/u/p_rex)\
**Post date:** [June 25, 2013, 1:26pm UTC](https://forum.sierrawireless.com/t/file-corruption-after-reset/5786/9 "2013-06-25T13:26:31Z")

</div>

I had the same issue.  
Does not seem related to reset.  
I managed to isolate it to be related to the UART drivers and some combinations of USB2UART cables.  
The files are corrupt after download.  
Workaround I managed downloading the files using USB, no corruption at all.

FYI: After upgrading FW & OS I no longer have the issue.

Cheers  
P

---

<div class="post-metadata">

**Author:** ![multi](https://avatars.discourse-cdn.com/v4/letter/m/d78d45/32.png) [@multi](https://forum.sierrawireless.com/u/multi)\
**Post date:** [July 5, 2013, 8:09am UTC](https://forum.sierrawireless.com/t/file-corruption-after-reset/5786/10 "2013-07-05T08:09:44Z")

</div>

Really B7.52, and no release notes, yet.

br
