# Fax sending

**URL:** <https://forum.sierrawireless.com/t/fax-sending/613>\
**Category:** Legacy FX/FXT series\
**Created:** [August 14, 2006, 10:11am UTC](https://forum.sierrawireless.com/t/fax-sending/613 "2006-08-14T10:11:18Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Bulat](https://avatars.discourse-cdn.com/v4/letter/b/2bfe46/32.png) [@Bulat](https://forum.sierrawireless.com/u/Bulat)\
**Post date:** [August 14, 2006, 10:11am UTC](https://forum.sierrawireless.com/t/fax-sending/613/1 "2006-08-14T10:11:18Z")

</div>

Hello.  
our module is M1306B  
I need to send the fax on some phone number  
In open AT sample applications i did n’t find the example.  
but notes,about this feature, have been in ad docs

---

<div class="post-metadata">

**Author:** ![jan](https://avatars.discourse-cdn.com/v4/letter/j/ce7236/32.png) [@jan](https://forum.sierrawireless.com/u/jan)\
**Post date:** [August 14, 2006, 12:32pm UTC](https://forum.sierrawireless.com/t/fax-sending/613/2 "2006-08-14T12:32:08Z")

</div>

Hi Bulat,

I would guess it uses the standard fax commands… If somebody could confirm this? If the standard commands are used, Wavecom does not need to give you an example or explain to you how those commands are used… You should read the specification and literature that explains this…

Best Regards,  
Jan