# Fastract Internet

**URL:** <https://forum.sierrawireless.com/t/fastract-internet/4576>\
**Category:** Open AT\
**Created:** [July 21, 2010, 4:44am UTC](https://forum.sierrawireless.com/t/fastract-internet/4576 "2010-07-21T04:44:46Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![angle9](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.sierrawireless.com/angle9/32/2500_2.png) [@angle9](https://forum.sierrawireless.com/u/angle9)\
**Post date:** [July 21, 2010, 4:44am UTC](https://forum.sierrawireless.com/t/fastract-internet/4576/1 "2010-07-21T04:44:46Z")

</div>

Hi all…

I have wavecom fastrack M1306B-Q2403A /WM15841.  
ATI3 result:  
641b09gg.Q2403A 1320676 061804 14:38

I want to use this modem as tcp client. The modem is connected to a Data Collector Unit (DCU). So I can read DCU data from my PC via internet (TCP/IP protocol).

Is it possible just using AT Command?

I have read “AT Commands User Guide for wavecomm IP V5.01” and i try, but almost command reply ERROR.

Thanks

---

<div class="post-metadata">

**Author:** ![awneil](https://avatars.discourse-cdn.com/v4/letter/a/49beb7/32.png) [@awneil](https://forum.sierrawireless.com/u/awneil)\
**Post date:** [July 21, 2010, 6:16am UTC](https://forum.sierrawireless.com/t/fastract-internet/4576/2 "2010-07-21T06:16:17Z")

</div>

> [@angle9](#):
>
> Is it possible just using AT Command?

Yes

> [@](#):
>
> I have read “AT Commands User Guide for wavecomm IP V5.01”

Did you miss this bit (emphasis added):

> [@](#):
>
> 3. Principles  
> The wipSoft is an Open AT® application that implements the TCP/IP protocols using custom AT  
> commands. This Open AT® application operates in co‐operative mode and must be downloaded  
> to the Wavecom Wireless CPU®.

> [@](#):
>
> but almost command reply ERROR.

Did you try AT+CMEE=1 to get more detailed error codes?

---

<div class="post-metadata">

**Author:** ![angle9](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.sierrawireless.com/angle9/32/2500_2.png) [@angle9](https://forum.sierrawireless.com/u/angle9)\
**Post date:** [July 21, 2010, 6:29am UTC](https://forum.sierrawireless.com/t/fastract-internet/4576/3 "2010-07-21T06:29:53Z")

</div>

> [@](#):
>
> ```
> 3. Principles
> The wipSoft is an Open AT® application that implements the TCP/IP protocols using custom AT
> commands. This Open AT® application operates in co‐operative mode and must be downloaded
> to the Wavecom Wireless CPU®.
> 
> ```

I see, so my modem didn’t have this wipsoft. How to download this wipsoft?  
I’m new in Open AT application. Any suggestion how do i start?

> [@](#):
>
> Did you try AT+CMEE=1 to get more detailed error codes?

AT+CMEE=1  
OK

Thanks

---

<div class="post-metadata">

**Author:** ![awneil](https://avatars.discourse-cdn.com/v4/letter/a/49beb7/32.png) [@awneil](https://forum.sierrawireless.com/u/awneil)\
**Post date:** [July 21, 2010, 6:47am UTC](https://forum.sierrawireless.com/t/fastract-internet/4576/4 "2010-07-21T06:47:14Z")

</div>

> [@angle9](#):
>
> so my modem didn’t have this wipsoft.

Almost certainly - to be sure, check with your supplier!

When buying products like this, it really is important to discuss your requirements in detail with the supplier before parting with your cash!

> [@](#):
>
> How to download this wipsoft?

Whoever sold you the modem should also be able to provide this

> [@](#):
>
> I’m new in Open AT application. Any suggestion how do i start?

Get your supplier to support you with a n introductory demo or tutorial, or whatever!

Again, when selecting products like this, a really important part of the selection process is to ensure that your supplier will be able to adequately support you!

---

<div class="post-metadata">

**Author:** ![angle9](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.sierrawireless.com/angle9/32/2500_2.png) [@angle9](https://forum.sierrawireless.com/u/angle9)\
**Post date:** [July 22, 2010, 3:02am UTC](https://forum.sierrawireless.com/t/fastract-internet/4576/5 "2010-07-22T03:02:08Z")

</div>

Thanks for the reply…

Is it possible to upgrade the firmware so it can support WIPSoft?

I try M2M studio and try to download but always failed.

I also try with DWL Win and download firmware file for archive of wavecomm website.  
How to configure RESET pin and BOOT pin when download the firmware using DWL WIN?

Or I mus buy new modem ? 😢  
Thanks

---

<div class="post-metadata">

**Author:** ![awneil](https://avatars.discourse-cdn.com/v4/letter/a/49beb7/32.png) [@awneil](https://forum.sierrawireless.com/u/awneil)\
**Post date:** [July 22, 2010, 5:49am UTC](https://forum.sierrawireless.com/t/fastract-internet/4576/6 "2010-07-22T05:49:30Z")

</div>

> [@angle9](#):
>
> Is it possible to upgrade the firmware so it can support WIPSoft?

The firmware supports WIPSoft - it’s just a matter of loading WIPSoft!

> [@](#):
>
> I try M2M studio … I also try with DWL Win …

Rather than just trying random stuff, why don’t you talk to your supplier ?! 😒