# Fastrack Supreme is going to be obsolete soon

**URL:** <https://forum.sierrawireless.com/t/fastrack-supreme-is-going-to-be-obsolete-soon/4225>\
**Category:** Legacy FX/FXT series\
**Created:** [February 23, 2010, 6:46am UTC](https://forum.sierrawireless.com/t/fastrack-supreme-is-going-to-be-obsolete-soon/4225 "2010-02-23T06:46:29Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![yong](https://avatars.discourse-cdn.com/v4/letter/y/b487fb/32.png) [@yong](https://forum.sierrawireless.com/u/yong)\
**Post date:** [February 23, 2010, 6:46am UTC](https://forum.sierrawireless.com/t/fastrack-supreme-is-going-to-be-obsolete-soon/4225/1 "2010-02-23T06:46:29Z")

</div>

the new module(xtend) will be fatter(longer,thicker,wider).  
unfortuately we have put the supreme in the case. if we upgrade to xtend, we have to redesign the case and the PCB connected to the module.

do you guys face this problem?  
if many customer have this problem and they may keep a big stock(from our distributor).  
…  
Transition from Fastrack Supreme to Fastrack Xtend will be done according to following  
plan:

• Last Time Buy is 30/06/2010  
• Last Time Shipment is 30/09/2010

Please note also the existing Fastrack Supreme kitting boxes will be updated with  
Fastrack Xtend.

You can request samples of both Fastrack Xtend GPRS (FXT001) and Fastrack Xtend  
EDGE (FXT002) now. Commercial availability of these two references is planned for  
November 2009.

Fastrack Xtend GPRS (FXT001) and Fastrack Xtend (FXT002) are supported from the  
Open AT® Software Suite 2.30

The references of each variant in Fastrack Xtend range are listed under.  
…

---

<div class="post-metadata">

**Author:** ![awneil](https://avatars.discourse-cdn.com/v4/letter/a/49beb7/32.png) [@awneil](https://forum.sierrawireless.com/u/awneil)\
**Post date:** [February 23, 2010, 7:19am UTC](https://forum.sierrawireless.com/t/fastrack-supreme-is-going-to-be-obsolete-soon/4225/2 "2010-02-23T07:19:56Z")

</div>

Would a Fargo Maestro fit instead?

![](http://www.fargotelecom.com/images/maestro-100.jpg)  
[fargotelecom.com/products\_modems.htm](http://www.fargotelecom.com/products_modems.htm)

Or could you put an Integra (or whatever it’s called now) onto a carrier board?

Or even build your own Q26 board?
