I’m quite sure that the SMS is actually being delivered by the network in fact it arrives and displayed on the terminal emulator. I am running my app on RTE mode. I already tried to update the modem’s firmware via Send file command in hyperterminal using the 1k XMODEM protocol but same happens.
Actually i am able to receive the message before from my sms handler but only once. It happens when i used the modem i am using now for to develop an open AT app for the very first time. Upon power up i also notice the following WIND messages that never happens before. Could this be the problem? Here are the WIND messages the terminal emulator displayed upon startup:
+WIND: 13
+WIND: 1
+WIND: 16
+WIND: 4
+WIND: 10,“SM”,1,“FD”,0,“ON”,1,“EN”,0
+WIND: 11,“984F7420D1EFA088EC12ED50191E1855”,“6B30010054C5C9D011FF0205AF45363F”
,“FB0A9E6A91FA8BEF4CA97C7A0F234E7B”,“33D1E6E047605D685D09EA2D39802F67”
+WIND: 7