# Extended AT Command password for WP7702 developer kit

**URL:** <https://forum.sierrawireless.com/t/extended-at-command-password-for-wp7702-developer-kit/17118>\
**Category:** IoT Modules\
**Created:** [July 30, 2019, 5:21am UTC](https://forum.sierrawireless.com/t/extended-at-command-password-for-wp7702-developer-kit/17118 "2019-07-30T05:21:28Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![m2msupport](https://avatars.discourse-cdn.com/v4/letter/m/c57346/32.png) [@m2msupport](https://forum.sierrawireless.com/u/m2msupport)\
**Post date:** [July 30, 2019, 5:21am UTC](https://forum.sierrawireless.com/t/extended-at-command-password-for-wp7702-developer-kit/17118/1 "2019-07-30T05:21:29Z")

</div>

I recently bought the mangOH Red with WP7702 module. To use the extended AT commands, what is the OEM password that needs to be used with AT!ENTERCND command?

---

<div class="post-metadata">

**Author:** ![jyijyi](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.sierrawireless.com/jyijyi/32/4766_2.png) [@jyijyi](https://forum.sierrawireless.com/u/jyijyi)\
**Post date:** [July 30, 2019, 5:56am UTC](https://forum.sierrawireless.com/t/extended-at-command-password-for-wp7702-developer-kit/17118/2 "2019-07-30T05:56:50Z")

</div>

You can use At! entercnd=“A710”

---

<div class="post-metadata">

**Author:** ![m2msupport](https://avatars.discourse-cdn.com/v4/letter/m/c57346/32.png) [@m2msupport](https://forum.sierrawireless.com/u/m2msupport)\
**Post date:** [July 30, 2019, 6:07am UTC](https://forum.sierrawireless.com/t/extended-at-command-password-for-wp7702-developer-kit/17118/3 "2019-07-30T06:07:36Z")

</div>

Hi jyijyi - Thanks for your reply. I’d tried those command earlier but i’m getting an error.

At!entercnd=“A710”

ERROR

At!ENTERCND=“A710”

ERROR

---

<div class="post-metadata">

**Author:** ![jyijyi](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.sierrawireless.com/jyijyi/32/4766_2.png) [@jyijyi](https://forum.sierrawireless.com/u/jyijyi)\
**Post date:** [July 30, 2019, 2:22pm UTC](https://forum.sierrawireless.com/t/extended-at-command-password-for-wp7702-developer-kit/17118/4 "2019-07-30T14:22:40Z")

</div>

This is strange, do you have one more module to test?

---

<div class="post-metadata">

**Author:** ![m2msupport](https://avatars.discourse-cdn.com/v4/letter/m/c57346/32.png) [@m2msupport](https://forum.sierrawireless.com/u/m2msupport)\
**Post date:** [July 30, 2019, 2:52pm UTC](https://forum.sierrawireless.com/t/extended-at-command-password-for-wp7702-developer-kit/17118/5 "2019-07-30T14:52:35Z")

</div>

I don’t have any other module to test, just the one that came with the developer kit.  
Other commands such as AT!MAPUART, AT!GETBAND, AT!GETRAT are returning valid results, so I don’t think there is any issue with the AT interface itself.

---

<div class="post-metadata">

**Author:** ![jyijyi](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.sierrawireless.com/jyijyi/32/4766_2.png) [@jyijyi](https://forum.sierrawireless.com/u/jyijyi)\
**Post date:** [July 30, 2019, 3:16pm UTC](https://forum.sierrawireless.com/t/extended-at-command-password-for-wp7702-developer-kit/17118/6 "2019-07-30T15:16:24Z")

</div>

Problem is i don’t see error in this command.  
I suspect this only happens one particular module.