# ERINFO equivalent on Q64 with GR64 plug in

**URL:** <https://forum.sierrawireless.com/t/erinfo-equivalent-on-q64-with-gr64-plug-in/5567>\
**Category:** Legacy AirPrime modules\
**Created:** [April 19, 2012, 5:22pm UTC](https://forum.sierrawireless.com/t/erinfo-equivalent-on-q64-with-gr64-plug-in/5567 "2012-04-19T17:22:40Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![aemsley](https://avatars.discourse-cdn.com/v4/letter/a/74df32/32.png) [@aemsley](https://forum.sierrawireless.com/u/aemsley)\
**Post date:** [April 19, 2012, 5:22pm UTC](https://forum.sierrawireless.com/t/erinfo-equivalent-on-q64-with-gr64-plug-in/5567/1 "2012-04-19T17:22:40Z")

</div>

Hi,

I’ve already posted this in the Q series forum - but perhaps this is a better place to post it??

We’re using the Q64 module with the GR64 plug in. The GR64 supports an AT command AT\*ERINFO to display the network capability of the current cell. This command isn’t supported on the Q64 with the GR64 plug in.

Is there a Q64 command that will produce a similar result?

We want to be able to display whether the current cell supports GPRS.

Thanks

Andrew

---

<div class="post-metadata">

**Author:** ![lotam](https://avatars.discourse-cdn.com/v4/letter/l/958977/32.png) [@lotam](https://forum.sierrawireless.com/u/lotam)\
**Post date:** [April 20, 2012, 12:53pm UTC](https://forum.sierrawireless.com/t/erinfo-equivalent-on-q64-with-gr64-plug-in/5567/2 "2012-04-20T12:53:44Z")

</div>

Hi Andrew,

“AT+WGPRS=9,1” appears to be a close match to activate unsolicited notification.  
Please read AT command guide for parameter 2 setting and refer to section 14.2.3 to decode reported by +WGPRSIND.

L
