# EM9291 SKU's

**URL:** <https://forum.sierrawireless.com/t/em9291-skus/36233>\
**Category:** MC/EM Series\
**Created:** [November 17, 2026, 12:33pm UTC](https://forum.sierrawireless.com/t/em9291-skus/36233 "2026-11-17T12:33:03Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![sahokas](https://avatars.discourse-cdn.com/v4/letter/s/838e76/32.png) [@sahokas](https://forum.sierrawireless.com/u/sahokas)\
**Post date:** [November 17, 2026, 12:33pm UTC](https://forum.sierrawireless.com/t/em9291-skus/36233/1 "2026-11-17T12:33:03Z")

</div>

Hi,

What is the difference between EM9291 SKUs 1105271 and 1105285? Should I expect some differences in performance or in the way they should be used? Different at-commands or something like that?

br, Sami

---

<div class="post-metadata">

**Author:** ![jyijyi](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.sierrawireless.com/jyijyi/32/4766_2.png) [@jyijyi](https://forum.sierrawireless.com/u/jyijyi)\
**Post date:** [November 17, 2026, 3:39pm UTC](https://forum.sierrawireless.com/t/em9291-skus/36233/2 "2026-11-17T15:39:53Z")

</div>

Please see below:

| 1105271 | | EM9291,GENERIC,GENERIC/AT&T/BELL/TELUS/T-MOBILE USA/VERIZON,02.16.05.00,SWIR IMEI |
| --- | --- | --- |
| 1105285 | | EM9291,GENERIC,AT&T/BELL/DOCOMO/KDDI/ROGERS/SOFTBANK/TELSTRA/TELUS/T-MOBILE USA,03.04.10.01,SWIR IMEI,USB,+B106 |

the SKU 1105285 has band 106 enabled.  
And the default loaded firmware and PRI are different

---

<div class="post-metadata">

**Author:** ![sahokas](https://avatars.discourse-cdn.com/v4/letter/s/838e76/32.png) [@sahokas](https://forum.sierrawireless.com/u/sahokas)\
**Post date:** [November 18, 2026, 6:54am UTC](https://forum.sierrawireless.com/t/em9291-skus/36233/3 "2026-11-18T06:54:27Z")

</div>

Ok, thanks for the info. And there shouldn’t be any problem upgrading it to SWIX65C\_03.04.10.01\_GENERIC\_040.025\_001?

I also want to make sure that there is no need to operate it differently. For example 2 antenna configuration should be handled differently depending on SKU. There shouldn’t be any other differences like that?

br, Sami

---

<div class="post-metadata">

**Author:** ![jyijyi](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.sierrawireless.com/jyijyi/32/4766_2.png) [@jyijyi](https://forum.sierrawireless.com/u/jyijyi)\
**Post date:** [November 18, 2026, 7:23am UTC](https://forum.sierrawireless.com/t/em9291-skus/36233/4 "2026-11-18T07:23:08Z")

</div>

I think it can be upgraded.  
Please see the release note on the section about firmware upgrade:

> **[EM929x CRN Release Note | Source](https://source.sierrawireless.com/resources/airprime/software/em929x/em929x-crn-release-note)**

For 2 antenna configuration, you need to get the application note from distributor.  
New SKU and old SKU are using different AT command to enable 2 antenna option.
