# EM9191 config **URL:** \ **Category:** MC/EM Series\ **Created:** [January 11, 2023, 4:24am UTC](https://forum.sierrawireless.com/t/em9191-config/28726 "2023-01-11T04:24:46Z")\ **Posts on this page:** 11\ **Page:** 1
**Author:** ![himgupta](https://avatars.discourse-cdn.com/v4/letter/h/9de053/32.png) [@himgupta](https://forum.sierrawireless.com/u/himgupta)\ **Post date:** [January 11, 2023, 4:24am UTC](https://forum.sierrawireless.com/t/em9191-config/28726/1 "2023-01-11T04:24:46Z")
Hello, I am trying to make basic call with EM9191 module, it seems module is not receiving any RF energy. I noticed, SIM\_PWR is 0V, and SIM is not detected by AT+CIN? command. Is there any setup of command we need to run to Configure the EM9191 module ? Do we need any command to enable USIM\_PWR ? Firmware : SWIX55C\_03.09.06.00. Thanks ---
**Author:** ![jyijyi](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.sierrawireless.com/jyijyi/32/4766_2.png) [@jyijyi](https://forum.sierrawireless.com/u/jyijyi)\ **Post date:** [January 11, 2023, 5:08am UTC](https://forum.sierrawireless.com/t/em9191-config/28726/2 "2023-01-11T05:08:31Z")
what are the returns of the followings? AT!ENTERCND=“A710” ati3 at!impref? AT+CFUN? AT!UIMS? AT!PCINFO? AT+Cpin? AT!CUSTOM? ---
**Author:** ![himgupta](https://avatars.discourse-cdn.com/v4/letter/h/9de053/32.png) [@himgupta](https://forum.sierrawireless.com/u/himgupta)\ **Post date:** [January 11, 2023, 6:27am UTC](https://forum.sierrawireless.com/t/em9191-config/28726/3 "2023-01-11T06:27:07Z")
Hello, Please find AT!ENTERCND=“ciena123” OK ati3 Manufacturer: Sierra Wireless, Incorporated Model: EM9191 Revision: SWIX55C\_03.09.06.00 340b2d jenkins 2022/03/16 00:37:53 IMEI: 355890341092943 IMEI SV: 21 FSN: CX2437506501A1 +GCAP: +CGSM,+DS,+ES OK at!impref? !IMPREF: preferred fw version: 03.09.06.00 preferred carrier name: GENERIC preferred config name: GENERIC\_030.038\_000 preferred subpri index: 000 current fw version: 03.09.06.00 current carrier name: GENERIC current config name: GENERIC\_030.038\_000 current subpri index: 000 OK AT+CFUN? +CFUN: 1 OK AT!UIMS? !UIMS: 0 OK AT!PCINFO? State: Online LPM voters - Temp:0, Volt:0, User:0, W\_DISABLE:0, IMSWITCH:0, BIOS:0, LWM2M:0, OMADM:0, FOTA:0, RFCAL:0, , RFC\_INIT:0 LPM persistence - None OK AT+Cpin? +CME ERROR: SIM not inserted AT!CUSTOM? !CUSTOM: GPSENABLE 0x01 IPV6ENABLE 0x01 SIMLPM 0x01 IMCONFIG 0x02 ICMPINTSRVDIS 0x01 OK ---
**Author:** ![jyijyi](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.sierrawireless.com/jyijyi/32/4766_2.png) [@jyijyi](https://forum.sierrawireless.com/u/jyijyi)\ **Post date:** [January 11, 2023, 7:54am UTC](https://forum.sierrawireless.com/t/em9191-config/28726/4 "2023-01-11T07:54:05Z")
I don’t see problem. You can try the same FW and setting as mine: ```auto ati3 Manufacturer: Sierra Wireless, Incorporated Model: EM9191 Revision: SWIX55C_03.09.11.00 7bf975 jenkins 2022/06/10 20:36:01 IMEI: 355890340712345 IMEI SV: 22 FSN: 78214751212345 +GCAP: +CGSM OK at!pcinfo? State: Online LPM voters - Temp:0, Volt:0, User:0, W_DISABLE:0, IMSWITCH:0, BIOS:0, LWM2M:0, OMADM:0, FOTA:0, NVCRIT:0, RFCAL:0, , RFC_INIT:0 LPM persistence - None OK at!impref? !IMPREF: preferred fw version: 03.09.11.00 preferred carrier name: GENERIC preferred config name: GENERIC_030.044_001 preferred subpri index: 000 current fw version: 03.09.11.00 current carrier name: GENERIC current config name: GENERIC_030.044_001 current subpri index: 000 OK at!custom? !CUSTOM: GPSENABLE 0x01 UIM2ENABLE 0x02 IPV6ENABLE 0x01 SIMLPM 0x01 IMCONFIG 0x02 ICMPINTSRVDIS 0x01 QXDMLOGENABLE 0x01 SIMLPA 0x01 MBIMMODE 0x01 OK at!uims? !UIMS: 0 OK at+cpin? +CPIN: READY OK at+cfun? +CFUN: 1 OK ``` ---
**Author:** ![himgupta](https://avatars.discourse-cdn.com/v4/letter/h/9de053/32.png) [@himgupta](https://forum.sierrawireless.com/u/himgupta)\ **Post date:** [January 11, 2023, 11:10am UTC](https://forum.sierrawireless.com/t/em9191-config/28726/5 "2023-01-11T11:10:30Z")
Hello, I tried below setting, still I am getting SIM error. I measured via oscilloscope as well, there is no voltage on USIM\_PWR (Pin 36) Is there any command to enable or test USIM\_PWR ? ati3 Manufacturer: Sierra Wireless, Incorporated Model: EM9191 Revision: SWIX55C\_03.09.06.00 340b2d jenkins 2022/03/16 00:37:53 IMEI: 355890341092943 IMEI SV: 21 FSN: CX2437506501A1 +GCAP: +CGSM OK at!pcinfo? State: Online LPM voters - Temp:0, Volt:0, User:0, W\_DISABLE:0, IMSWITCH:0, BIOS:0, LWM2M:0, OMADM:0, FOTA:0, RFCAL:0, , RFC\_INIT:0 LPM persistence - None OK at!impref? !IMPREF: preferred fw version: 03.09.06.00 preferred carrier name: GENERIC preferred config name: GENERIC\_030.038\_000 preferred subpri index: 000 current fw version: 03.09.06.00 current carrier name: GENERIC current config name: GENERIC\_030.038\_000 current subpri index: 000 OK at!custom? !CUSTOM: GPSENABLE 0x01 UIM2ENABLE 0x02 IPV6ENABLE 0x01 SIMLPM 0x01 IMCONFIG 0x02 ICMPINTSRVDIS 0x01 QXDMLOGENABLE 0x01 SIMLPA 0x01 MBIMMODE 0x01 OK at!uims? !UIMS: 0 OK at+cpin? +CME ERROR: SIM not inserted at+cfun? +CFUN: 1 OK ---
**Author:** ![jyijyi](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.sierrawireless.com/jyijyi/32/4766_2.png) [@jyijyi](https://forum.sierrawireless.com/u/jyijyi)\ **Post date:** [January 11, 2023, 11:50am UTC](https://forum.sierrawireless.com/t/em9191-config/28726/6 "2023-01-11T11:50:03Z")
are you testing in the development kit? ---
**Author:** ![himgupta](https://avatars.discourse-cdn.com/v4/letter/h/9de053/32.png) [@himgupta](https://forum.sierrawireless.com/u/himgupta)\ **Post date:** [January 11, 2023, 12:14pm UTC](https://forum.sierrawireless.com/t/em9191-config/28726/7 "2023-01-11T12:14:50Z")
Hello, I am testing on our board. we don’t have Sierra wireless development kit. Thanks ---
**Author:** ![jyijyi](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.sierrawireless.com/jyijyi/32/4766_2.png) [@jyijyi](https://forum.sierrawireless.com/u/jyijyi)\ **Post date:** [January 11, 2023, 2:52pm UTC](https://forum.sierrawireless.com/t/em9191-config/28726/8 "2023-01-11T14:52:39Z")
I am testing on dev kit Maybe some hardware problem on your board ---
**Author:** ![himgupta](https://avatars.discourse-cdn.com/v4/letter/h/9de053/32.png) [@himgupta](https://forum.sierrawireless.com/u/himgupta)\ **Post date:** [January 11, 2023, 4:18pm UTC](https://forum.sierrawireless.com/t/em9191-config/28726/9 "2023-01-11T16:18:32Z")
Hello, Can you suggest, Is there any dependency for SIM\_PWR to generate from Module ? 1. Is there any GPIO dependency that must be drive low or high ? 2. Do we need to run any command to enable SIM\_PWR ? Thanks ---
**Author:** ![jyijyi](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.sierrawireless.com/jyijyi/32/4766_2.png) [@jyijyi](https://forum.sierrawireless.com/u/jyijyi)\ **Post date:** [January 11, 2023, 4:52pm UTC](https://forum.sierrawireless.com/t/em9191-config/28726/10 "2023-01-11T16:52:26Z")
I don’t run any extra command before for enabling SIM interface… You might need to read the SIM section in PTS: ![image](https://us1.discourse-cdn.com/flex025/uploads/sierrawireless/original/2X/3/376ca4ad638de73824c67ae2ae24cc2006ddafbf.png) ---
**Author:** ![himgupta](https://avatars.discourse-cdn.com/v4/letter/h/9de053/32.png) [@himgupta](https://forum.sierrawireless.com/u/himgupta)\ **Post date:** [January 25, 2023, 5:34am UTC](https://forum.sierrawireless.com/t/em9191-config/28726/11 "2023-01-25T05:34:00Z")
Hello, The SIM detect signal logic was reverse in my design, It is working after disconnecting the Signal. Thanks for your help. Thanks Himanshu Thanks Himanshu