# EM7565 network parameters in WCDMA mode

**URL:** <https://forum.sierrawireless.com/t/em7565-network-parameters-in-wcdma-mode/18548>\
**Category:** IoT Modules\
**Created:** [December 3, 2019, 11:58am UTC](https://forum.sierrawireless.com/t/em7565-network-parameters-in-wcdma-mode/18548 "2019-12-03T11:58:16Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![brunotalhao](https://avatars.discourse-cdn.com/v4/letter/b/5e9695/32.png) [@brunotalhao](https://forum.sierrawireless.com/u/brunotalhao)\
**Post date:** [December 3, 2019, 11:58am UTC](https://forum.sierrawireless.com/t/em7565-network-parameters-in-wcdma-mode/18548/1 "2019-12-03T11:58:16Z")

</div>

Hi,

I am developing an application which uses a EM7565 module to gather network parameters (serving and neighbor cells). I mostly use AT!LTEINFO to get those parameters, which shows GSM, CDMA and WCDMA information if available, according to the manual.

The problem is that if I force it to use only 3G (AT!SELRAT=01), AT!LTEINFO replies “Not Available”. Is there any command that I can use to gather network information in this mode?

---

<div class="post-metadata">

**Author:** ![jyijyi](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.sierrawireless.com/jyijyi/32/4766_2.png) [@jyijyi](https://forum.sierrawireless.com/u/jyijyi)\
**Post date:** [December 3, 2019, 1:04pm UTC](https://forum.sierrawireless.com/t/em7565-network-parameters-in-wcdma-mode/18548/2 "2019-12-03T13:04:58Z")

</div>

How about at! gstatus?

---

<div class="post-metadata">

**Author:** ![brunotalhao](https://avatars.discourse-cdn.com/v4/letter/b/5e9695/32.png) [@brunotalhao](https://forum.sierrawireless.com/u/brunotalhao)\
**Post date:** [December 3, 2019, 1:11pm UTC](https://forum.sierrawireless.com/t/em7565-network-parameters-in-wcdma-mode/18548/3 "2019-12-03T13:11:52Z")

</div>

AT!GSTATUS only gives me information about the serving cell, I need to check for neighbors too. It also does not report RxLev.

---

<div class="post-metadata">

**Author:** ![jyijyi](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.sierrawireless.com/jyijyi/32/4766_2.png) [@jyijyi](https://forum.sierrawireless.com/u/jyijyi)\
**Post date:** [December 3, 2019, 1:42pm UTC](https://forum.sierrawireless.com/t/em7565-network-parameters-in-wcdma-mode/18548/4 "2019-12-03T13:42:38Z")

</div>

Is that you only consider AT command?

---

<div class="post-metadata">

**Author:** ![brunotalhao](https://avatars.discourse-cdn.com/v4/letter/b/5e9695/32.png) [@brunotalhao](https://forum.sierrawireless.com/u/brunotalhao)\
**Post date:** [December 3, 2019, 2:31pm UTC](https://forum.sierrawireless.com/t/em7565-network-parameters-in-wcdma-mode/18548/5 "2019-12-03T14:31:19Z")

</div>

I am not familiarized with other methods to do so, what would be the best way to retrieve those parameters?

---

<div class="post-metadata">

**Author:** ![jyijyi](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.sierrawireless.com/jyijyi/32/4766_2.png) [@jyijyi](https://forum.sierrawireless.com/u/jyijyi)\
**Post date:** [December 4, 2019, 1:13am UTC](https://forum.sierrawireless.com/t/em7565-network-parameters-in-wcdma-mode/18548/6 "2019-12-04T01:13:27Z")

</div>

I don’t see any other AT command suits your requirement, probably you need to use QMI SDK API.