# EM7565 CA setup

**URL:** <https://forum.sierrawireless.com/t/em7565-ca-setup/14835>\
**Category:** MC/EM Series\
**Created:** [December 21, 2018, 6:04pm UTC](https://forum.sierrawireless.com/t/em7565-ca-setup/14835 "2018-12-21T18:04:36Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Mage](https://avatars.discourse-cdn.com/v4/letter/m/6f9a4e/32.png) [@Mage](https://forum.sierrawireless.com/u/Mage)\
**Post date:** [December 21, 2018, 6:04pm UTC](https://forum.sierrawireless.com/t/em7565-ca-setup/14835/1 "2018-12-21T18:04:36Z")

</div>

I have come to the conclusion I am bad at this.

Background:  
Service provider:T-Mobile  
Bands/Width: AWS-1/15, Band12/5, Band66/10(but I believe this is a parent to AWS-1?)  
LTE module: EM7565

I attempted to enable CA via AT!LTECA which returned not implemented looking around I see that people have achieved this via the AT!BAND command and pulling examples I really do not fully understand I was able to see a 4+12 attempt but it always states SCC1: Inactive

In reading the specs r8 for EM7565 it shows 3 ca for 4+4+12 and 2 ca for 4+12

If some one can point me in the direction of figuring this out I would be very grateful.

---

<div class="post-metadata">

**Author:** ![fs1](https://avatars.discourse-cdn.com/v4/letter/f/439d5e/32.png) [@fs1](https://forum.sierrawireless.com/u/fs1)\
**Post date:** [December 22, 2018, 5:27pm UTC](https://forum.sierrawireless.com/t/em7565-ca-setup/14835/2 "2018-12-22T17:27:04Z")

</div>

No need to activate it, it should CA by default when the ISP supports it.

---

<div class="post-metadata">

**Author:** ![Oedenburger](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.sierrawireless.com/oedenburger/32/4028_2.png) [@Oedenburger](https://forum.sierrawireless.com/u/Oedenburger)\
**Post date:** [December 24, 2018, 6:17pm UTC](https://forum.sierrawireless.com/t/em7565-ca-setup/14835/3 "2018-12-24T18:17:37Z")

</div>

Run a quick speedtest and while sending some data check at!gstatus?

CA will be deactivated by the NTWK when no data is to be sent.

---

<div class="post-metadata">

**Author:** ![Mage](https://avatars.discourse-cdn.com/v4/letter/m/6f9a4e/32.png) [@Mage](https://forum.sierrawireless.com/u/Mage)\
**Post date:** [December 25, 2018, 2:52am UTC](https://forum.sierrawireless.com/t/em7565-ca-setup/14835/4 "2018-12-25T02:52:37Z")

</div>

my god Oedenburger this was the issue. was wracking my head why it worked on a 7455 and not on the 7565.

Thank You
