# EM7511 only Have Network adapter, how to Swith to MBIM

**URL:** <https://forum.sierrawireless.com/t/em7511-only-have-network-adapter-how-to-swith-to-mbim/17223>\
**Category:** MC/EM Series\
**Created:** [August 9, 2019, 4:02am UTC](https://forum.sierrawireless.com/t/em7511-only-have-network-adapter-how-to-swith-to-mbim/17223 "2019-08-09T04:02:37Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![jyijyi](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.sierrawireless.com/jyijyi/32/4766_2.png) [@jyijyi](https://forum.sierrawireless.com/u/jyijyi)\
**Post date:** [August 9, 2019, 6:08am UTC](https://forum.sierrawireless.com/t/em7511-only-have-network-adapter-how-to-swith-to-mbim/17223/2 "2019-08-09T06:08:53Z")

</div>

not sure if this helps you, you can give a try:

> [@My MC7710 can't work on Linux after plug-in it to Windows8](https://forum.sierrawireless.com/t/my-mc7710-cant-work-on-linux-after-plug-in-it-to-windows8/7986):
>
> Hi, I have a MC7710 module. It works well on Linux before. I can see ttyUSB0, ttyUSB1 and ttyUSB2 after install GobiSerial driver. I also can see qcqmi0 after install GobiNet driver. But all of them disappear now after I try to plug-in my modules to Windows8 host and dial-up LTE with SkyLight connection manager. I found there are some difference for the messages by cat /proc/bus/usb/devices. ===== While my module is workable on before, the message are as below ===== T: Bus=01 Lev=01 Pr…

---

_[View the full topic](https://forum.sierrawireless.com/t/em7511-only-have-network-adapter-how-to-swith-to-mbim/17223)._