# EM7511 module and Italian operator

**URL:** <https://forum.sierrawireless.com/t/em7511-module-and-italian-operator/32488>\
**Category:** MC/EM Series\
**Created:** [June 6, 2024, 12:56pm UTC](https://forum.sierrawireless.com/t/em7511-module-and-italian-operator/32488 "2024-06-06T12:56:59Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![r17lyuck](https://avatars.discourse-cdn.com/v4/letter/r/e9c0ed/32.png) [@r17lyuck](https://forum.sierrawireless.com/u/r17lyuck)\
**Post date:** [June 6, 2024, 12:56pm UTC](https://forum.sierrawireless.com/t/em7511-module-and-italian-operator/32488/1 "2024-06-06T12:56:59Z")

</div>

Hi, I purchased a laptop with an EM7511 module installed for internet browsing. I tried to insert a SIM from a local operator “Italy” but it doesn’t work. A doubt arises in my mind, reading the characteristics of the module it seems that the 7511 is compatible in America. Is it possible to make it work in Italy too or do I have to replace the module? If I have to replace it, which module could I use to connect to an operator in Italy?

Thank you  
Luca

---

<div class="post-metadata">

**Author:** ![jyijyi](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.sierrawireless.com/jyijyi/32/4766_2.png) [@jyijyi](https://forum.sierrawireless.com/u/jyijyi)\
**Post date:** [June 6, 2024, 12:58pm UTC](https://forum.sierrawireless.com/t/em7511-module-and-italian-operator/32488/2 "2024-06-06T12:58:38Z")

</div>

Did you check if the supported band available in italy?

> **[EM7511 LTE-Advanced Pro Module for Public Safety Solutions](https://www.sierrawireless.com/iot-modules/4g-modules/em7511/)**
>
> The EM7511 module offers unprecedented LTE speeds, bandwidth, and network performance on the M.2 form factor, enabling secure and reliable public safety communications on the FirstNet Band 14 spectrum.

What are the return of the followings?

```auto

Ati3
At!impref?
At!gstatus?
At+cgdcont?
At!selrat?
At!band?
AT!uims?

```

---

<div class="post-metadata">

**Author:** ![r17lyuck](https://avatars.discourse-cdn.com/v4/letter/r/e9c0ed/32.png) [@r17lyuck](https://forum.sierrawireless.com/u/r17lyuck)\
**Post date:** [June 6, 2024, 1:44pm UTC](https://forum.sierrawireless.com/t/em7511-module-and-italian-operator/32488/3 "2024-06-06T13:44:14Z")

</div>

![Screenshot 2024-06-06 150735](https://us1.discourse-cdn.com/flex025/uploads/sierrawireless/original/2X/f/fa4c6e193bbb03297194ff91b5bdcf1d3fbd9230.png)

yes the band is supported

AT!IMPREF?

!IMPREF:  
preferred fw version: 01.07.02.00  
preferred carrier name: ATT  
preferred config name: ATT\_002.008\_004  
current fw version: 01.07.02.00  
current carrier name: ATT  
current config name: ATT\_002.008\_004

!GSTATUS:  
Current Time: 1405 Temperature: 35  
Reset Counter: 2 Mode: ONLINE  
System mode: WCDMA PS state: Not attached  
WCDMA band: WCDMA 2100  
WCDMA channel: 10563  
MM (CS) state: IDLE LIMITED SERVICE

WCDMA L1 state:L1M\_SUSPENDED LAC: 5fdb (24539)  
RRC state: DISCONNECTED UTRAN Cell ID: 009207f1 (9570289)  
RxM RSSI C0: — RxD RSSI C0: —  
RxM RSSI C1: — RxD RSSI C1: —

AT+CGDCONT?

+CGDCONT: 1,“IPV4V6”,“broadband”,“0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0”,0,0,0,0  
+CGDCONT: 2,“IPV4V6”,“”,“0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0”,0,0,0,0  
+CGDCONT: 3,“IPV4V6”,“”,“0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0”,0,0,0,0

OK  
Following connection profiles are available,

CID-\> 1  
PDP Type-\>IPV4V6  
APN-\>broadband  
PDP Address-\>0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0  
Data Compression-\>0  
Header Compression-\>0

CID-\> 2  
PDP Type-\>IPV4V6  
APN-\>  
PDP Address-\>0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0  
Data Compression-\>0  
Header Compression-\>0

CID-\> 3  
PDP Type-\>IPV4V6  
APN-\>  
PDP Address-\>0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0  
Data Compression-\>0  
Header Compression-\>0

AT!SELRAT?

!SELRAT: 00, Automatic

AT!BAND?

Index, Name  
06, Europe

OK

AT!UIMS?

!UIMS: 0

OK

---

<div class="post-metadata">

**Author:** ![jyijyi](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.sierrawireless.com/jyijyi/32/4766_2.png) [@jyijyi](https://forum.sierrawireless.com/u/jyijyi)\
**Post date:** [June 6, 2024, 1:55pm UTC](https://forum.sierrawireless.com/t/em7511-module-and-italian-operator/32488/4 "2024-06-06T13:55:13Z")

</div>

the FW is very old, and I am not quite sure why it is using ATT PRI.  
I think you should use the GENERIC PRI with GCF approved  
[https://source.sierrawireless.com/resources/airprime/minicard/75xx/em\_mc75xx-approved-fw-packages/#sthash.ZgFQbkts.WRIYRIXW.dpbs](https://source.sierrawireless.com/resources/airprime/minicard/75xx/em_mc75xx-approved-fw-packages/#sthash.ZgFQbkts.WRIYRIXW.dpbs)

Also you need to set the correct APN in AT+CGDCONT.

---

<div class="post-metadata">

**Author:** ![r17lyuck](https://avatars.discourse-cdn.com/v4/letter/r/e9c0ed/32.png) [@r17lyuck](https://forum.sierrawireless.com/u/r17lyuck)\
**Post date:** [June 6, 2024, 3:02pm UTC](https://forum.sierrawireless.com/t/em7511-module-and-italian-operator/32488/5 "2024-06-06T15:02:15Z")

</div>

Thank you very much for helping jyijyi.  
With the new driver it works perfectly … he immediately hooked the operator line.
