# EM7455 Unable to run AT commands via com port

**URL:** <https://forum.sierrawireless.com/t/em7455-unable-to-run-at-commands-via-com-port/21839>\
**Category:** Uncategorized\
**Created:** [October 16, 2020, 5:22pm UTC](https://forum.sierrawireless.com/t/em7455-unable-to-run-at-commands-via-com-port/21839 "2020-10-16T17:22:00Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![dancash04](https://avatars.discourse-cdn.com/v4/letter/d/ed655f/32.png) [@dancash04](https://forum.sierrawireless.com/u/dancash04)\
**Post date:** [October 16, 2020, 5:22pm UTC](https://forum.sierrawireless.com/t/em7455-unable-to-run-at-commands-via-com-port/21839/1 "2020-10-16T17:22:00Z")

</div>

I have a mc7455 in a PCI express to mini pci adapter, plugged in via USB header. I got the device connected and flashed to the verizon firmware, and it will connect to the network and work successfully… for about 10 seconds, and then it resets. I am on latest firmware, and I’m guessing it is the qmi mode on windows not being reliable and needs switched to mbim. I see 3 com devices in device manager: Communications Port(com1), Sierra Wireless… LTE-A DM Port(com11), and LTE-A NMEA Port(com10). I have seen all the AT commands to switch this to single device more(or something like that), but the problem is I can’t get it to respond to any commands. I have connected to com1, com10, and com11. Com10 in this case is GPS and I see output flowing on occasion, but none of the connections ever take any input. I have tried ati to output status, I have tried to run ate1 to enable echo, but I never get any indication that my keystrokes and commands are being sent. Has serial been disabled potentially? Is there a way to reset it/reenable it?

---

<div class="post-metadata">

**Author:** ![cherokee](https://avatars.discourse-cdn.com/v4/letter/c/76d3ee/32.png) [@cherokee](https://forum.sierrawireless.com/u/cherokee)\
**Post date:** [October 19, 2020, 2:11am UTC](https://forum.sierrawireless.com/t/em7455-unable-to-run-at-commands-via-com-port/21839/2 "2020-10-19T02:11:48Z")

</div>

Hi dancash04,

You can get AT port number from Device manager -\> Modems - \>Sierra Wireless Snapdragon™ X7 LTE-A WWAN Modem -\> Modem tab

Thanks,

---

<div class="post-metadata">

**Author:** ![mlw](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.sierrawireless.com/mlw/32/3706_2.png) [@mlw](https://forum.sierrawireless.com/u/mlw)\
**Post date:** [October 19, 2020, 7:08am UTC](https://forum.sierrawireless.com/t/em7455-unable-to-run-at-commands-via-com-port/21839/3 "2020-10-19T07:08:55Z")

</div>

@dancash04

I guess Windows might have potentially disabled it (its only a bit mask free for anyone or thing to change), do you have the option of plugging the unit into a Linux system? Its just that its easier to see what is being enumerated at a Linux command line. Alternatively a screen shot of the device manager with the ‘modems’ and ‘Ports’ sections expanded will give a god idea about what is enumerated on Windows.

Regards

Matt
