# EM7455: LTEREJDELAY not found in AT!CUSTOM

**URL:** <https://forum.sierrawireless.com/t/em7455-lterejdelay-not-found-in-at-custom/22590>\
**Category:** IoT Modules\
**Created:** [January 15, 2021, 5:22am UTC](https://forum.sierrawireless.com/t/em7455-lterejdelay-not-found-in-at-custom/22590 "2021-01-15T05:22:12Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![akn](https://avatars.discourse-cdn.com/v4/letter/a/f17d59/32.png) [@akn](https://forum.sierrawireless.com/u/akn)\
**Post date:** [January 15, 2021, 5:22am UTC](https://forum.sierrawireless.com/t/em7455-lterejdelay-not-found-in-at-custom/22590/1 "2021-01-15T05:22:12Z")

</div>

How do I set the LTEREJDELAY on EM7455?

This option is mentioned in the reference document but it is not available in the AT!CUSTOM=? result.  
AT!CUSTOM=?  
!CUSTOM:  
“GPSENABLE”  
“GPSLPM”  
“GPIOSARENABLE”  
“GPSSEL”  
“GPSREFLOC”  
“IMSWITCHHIDE”  
“IMCONFIG”  
“IPV6ENABLE”  
“WAKEHOSTEN”  
“SIMHOTSWAPDIS”  
“CFUNPERSISTEN”  
“QMIDETACHEN”  
“UIM2ENABLE”  
“NETWORKNAMEFMT”  
“SIMLPM”  
“USBSERIALENABLE”  
“PCSCDISABLE”  
“DHCPRELAYENABLE”  
“FLOWNOTIDISABLE”  
“FASTENUMEN”  
“CSVOICEREJECT”  
“IPCHANNELRATEEN”  
“SINGLEAPNSWITCH”  
“DGENABLE”  
“TXONINDICATION”  
“SUBNETMSKENABLE”  
“ICMPINTSRVDIS”

“LTEREJDELAY”—Set delay before LTE attach requests are sent after TAU or  
service request rejection.  
:  
• 0–255 = Delay in 10 msec units. (e.g. 10=100 msec)  
• Actual range is 0–2.55 sec  
• Delay is cancelled if RRC connection is released early.  
• Suggested value (if delay is being enabled) is 50 (500 msec). Adjust the  
value as necessary based on testing.

ATI  
Manufacturer: Sierra Wireless, Incorporated  
Model: EM7455  
Revision: SWI9X30C\_02.33.03.00 r8209 CARMD-EV-FRMWR2 2019/08/28 20:59:30  
MEID: A00000AC719956  
ESN: 12800668567, 800A3397  
IMEI: 359073061394304  
IMEI SV: 20  
FSN: LF833224780210  
+GCAP: +CGSM

AT!GSTATUS?  
!GSTATUS:  
Current Time: 80295 Temperature: 36  
Reset Counter: 1 Mode: ONLINE  
System mode: LTE PS state: Attached  
LTE band: B4 LTE bw: 20 MHz  
LTE Rx chan: 2100 LTE Tx chan: 20100  
LTE CA state: NOT ASSIGNED  
EMM state: Registered Normal Service  
RRC state: RRC Idle  
IMS reg state: Full Srv IMS mode: Normal

PCC RxM RSSI: -66 RSRP (dBm): -93  
PCC RxD RSSI: -67 RSRP (dBm): -94  
Tx Power: – TAC: 2F05 (12037)  
RSRQ (dB): -6.3 Cell ID: 00B8160C (12064268)  
SINR (dB): 20.8

---

<div class="post-metadata">

**Author:** ![jyijyi](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.sierrawireless.com/jyijyi/32/4766_2.png) [@jyijyi](https://forum.sierrawireless.com/u/jyijyi)\
**Post date:** [January 15, 2021, 6:08am UTC](https://forum.sierrawireless.com/t/em7455-lterejdelay-not-found-in-at-custom/22590/2 "2021-01-15T06:08:07Z")

</div>

I saw in the “4117727 AirPrime EM-MC74xx AT Command Reference r4.pdf”, It has removed the “LTEREJDELAY” option.

---

<div class="post-metadata">

**Author:** ![akn](https://avatars.discourse-cdn.com/v4/letter/a/f17d59/32.png) [@akn](https://forum.sierrawireless.com/u/akn)\
**Post date:** [January 15, 2021, 6:41am UTC](https://forum.sierrawireless.com/t/em7455-lterejdelay-not-found-in-at-custom/22590/3 "2021-01-15T06:41:06Z")

</div>

Thank you!  
What is the default value for this? Is there any alternate command to change it?

---

<div class="post-metadata">

**Author:** ![jyijyi](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.sierrawireless.com/jyijyi/32/4766_2.png) [@jyijyi](https://forum.sierrawireless.com/u/jyijyi)\
**Post date:** [January 15, 2021, 6:53am UTC](https://forum.sierrawireless.com/t/em7455-lterejdelay-not-found-in-at-custom/22590/4 "2021-01-15T06:53:12Z")

</div>

This is not needed and you cannot change it.
