# EM7355 will not connect to Verizon LTE

**URL:** <https://forum.sierrawireless.com/t/em7355-will-not-connect-to-verizon-lte/28011>\
**Category:** MC/EM Series\
**Created:** [October 3, 2022, 2:16pm UTC](https://forum.sierrawireless.com/t/em7355-will-not-connect-to-verizon-lte/28011 "2022-10-03T14:16:04Z")\
**Posts on this page:** 10\
**Page:** 1

<div class="post-metadata">

**Author:** ![Bryce](https://avatars.discourse-cdn.com/v4/letter/b/8edcca/32.png) [@Bryce](https://forum.sierrawireless.com/u/Bryce)\
**Post date:** [October 3, 2022, 2:16pm UTC](https://forum.sierrawireless.com/t/em7355-will-not-connect-to-verizon-lte/28011/1 "2022-10-03T14:16:04Z")

</div>

Looking for some help with my EM7355 installed in a Panasonic CF-31 Toughbook.

Another tech was doing some testing and put a T-Mobile SIM card into this specific laptop. Now when trying to switch back to our primary Verizon SIM card it will not connect to the Verizon LTE network. It will connect to the slower 1x network. I have uninstalled and reinstalled the drivers, and tried both the Verizon and Generic firmware from Sierra Wireless. When I initially install the generic firmware it will reconnect to LTE, but then upon restart it defaults back to the VZW firmware which will not allow it to connect to LTE.

Any recommendations? When I use the AT!PRIID? command it will only give me the VZW firmware as an option and will not allow me to select the generic one as the default.

Also to note, this laptop worked without any issues before the T-Mobile SIM card was inserted into it.

---

<div class="post-metadata">

**Author:** ![jyijyi](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.sierrawireless.com/jyijyi/32/4766_2.png) [@jyijyi](https://forum.sierrawireless.com/u/jyijyi)\
**Post date:** [October 3, 2022, 2:29pm UTC](https://forum.sierrawireless.com/t/em7355-will-not-connect-to-verizon-lte/28011/2 "2022-10-03T14:29:43Z")

</div>

What is the return of the following?

At!entercnd=“A710”  
Ati3  
At!gobiimpref?  
At!custom?  
At!selrat?  
At!band?

---

<div class="post-metadata">

**Author:** ![Bryce](https://avatars.discourse-cdn.com/v4/letter/b/8edcca/32.png) [@Bryce](https://forum.sierrawireless.com/u/Bryce)\
**Post date:** [October 3, 2022, 2:32pm UTC](https://forum.sierrawireless.com/t/em7355-will-not-connect-to-verizon-lte/28011/3 "2022-10-03T14:32:19Z")

</div>

AT!entercnd=“A710”  
ERROR  
Ati3  
Manufacturer: Sierra Wireless, Incorporated  
Model: EM7355  
Revision: SWI9X15C\_05.05.58.01 r27044 carmd-fwbuild1 2015/03/05 00:02:40  
MEID: A00000EAE7F9AA  
ESN: 12808703821, 8084CF4D  
IMEI: \*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*  
IMEI SV: 19  
FSN: FD538309400611  
+GCAP: +CIS707-A, CIS-856, CIS-856-A, +CGSM, +CLTE2, +MS, +ES, +DS, +FCLASS

ERROR  
AT!GOBIIMPREF?  
!GOBIIMPREF:  
preferred fw version: 05.05.58.01  
preferred carrier name: VZW  
preferred config name: VZW\_005.029\_000  
current fw version: 05.05.58.01  
current carrier name: VZW  
current config name: VZW\_005.029\_000

OK  
AT!CUSTOM?  
!CUSTOM:  
CMCLIENT 0x01  
GPIOSARENABLE 0x01  
GPSENABLE 0x04  
GPSSEL 0x01  
NMEAENABLE 0x01  
GOBIIMEN 0x01  
GMMCAUSE7REMAP 0x01  
USBSERIALENABLE 0x02

OK  
AT!SELRAT?  
!SELRAT: Unknown RAT mode. Use AT!SELRAT to set band.  
00000030  
00000000

OK

AT!BAND?  
Index, Name  
00, All Bands

OK

---

<div class="post-metadata">

**Author:** ![jyijyi](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.sierrawireless.com/jyijyi/32/4766_2.png) [@jyijyi](https://forum.sierrawireless.com/u/jyijyi)\
**Post date:** [October 3, 2022, 2:36pm UTC](https://forum.sierrawireless.com/t/em7355-will-not-connect-to-verizon-lte/28011/4 "2022-10-03T14:36:49Z")

</div>

Other user did not see error…

> [@Issue with GPS in EM7355](https://forum.sierrawireless.com/t/issue-with-gps-in-em7355/23927):
>
> We have a fleet of Panasonic CF-53 MK4 laptops with Sierra Wireless EM7355 air cards. We recently switched from using external USB GPS pucks to using the EM7355’s internal GPS receiver for our vehicle tracking software. After the switch over, we began experiencing issues where the vehicles would random disappear off the tracking map. All the laptops are running Windows 10 v20H2 and the tracking software accesses the GPS via the NMEA COM port. After doing some troubleshooting in these laptops, I…

---

<div class="post-metadata">

**Author:** ![Bryce](https://avatars.discourse-cdn.com/v4/letter/b/8edcca/32.png) [@Bryce](https://forum.sierrawireless.com/u/Bryce)\
**Post date:** [October 3, 2022, 3:42pm UTC](https://forum.sierrawireless.com/t/em7355-will-not-connect-to-verizon-lte/28011/5 "2022-10-03T15:42:36Z")

</div>

Here are the additional fields you asked for:

AT!GOBIIMPREF?  
!GOBIIMPREF:  
preferred fw version: 05.05.58.01  
preferred carrier name: VZW  
preferred config name: VZW\_005.029\_000  
current fw version: 05.05.58.01  
current carrier name: VZW  
current config name: VZW\_005.029\_000

OK  
AT!CUSTOM?  
!CUSTOM:  
CMCLIENT 0x01  
GPIOSARENABLE 0x01  
GPSENABLE 0x04  
GPSSEL 0x01  
NMEAENABLE 0x01  
GOBIIMEN 0x01  
GMMCAUSE7REMAP 0x01  
USBSERIALENABLE 0x02

OK  
AT!SELRAT?  
!SELRAT: Unknown RAT mode. Use AT!SELRAT to set band.  
00000030  
00000000

OK

---

<div class="post-metadata">

**Author:** ![jyijyi](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.sierrawireless.com/jyijyi/32/4766_2.png) [@jyijyi](https://forum.sierrawireless.com/u/jyijyi)\
**Post date:** [October 3, 2022, 3:57pm UTC](https://forum.sierrawireless.com/t/em7355-will-not-connect-to-verizon-lte/28011/6 "2022-10-03T15:57:45Z")

</div>

How about at!gstatus?

How about setting at!selrat=1

---

<div class="post-metadata">

**Author:** ![Bryce](https://avatars.discourse-cdn.com/v4/letter/b/8edcca/32.png) [@Bryce](https://forum.sierrawireless.com/u/Bryce)\
**Post date:** [October 3, 2022, 4:44pm UTC](https://forum.sierrawireless.com/t/em7355-will-not-connect-to-verizon-lte/28011/7 "2022-10-03T16:44:52Z")

</div>

AT!GSTATUS?  
!GSTATUS:  
Current Time: 8277 Temperature: 37  
Bootup Time: 0 Mode: ONLINE  
System mode: HDR PS state: Attached  
CDMA band: US Cellular CDMA chan: 745  
Subnet mask: 64 Color code: 197  
PN offset: 64  
Sector ID: 0080:0580:0000:002B:1C0A:F8F1:B100:3302  
IMS reg state: No Srv IMS mode: Normal

RSSI (dBm): -92 ECIO (dB): -17  
IO (dBm): -84 SINR (dB): 3  
RX1 (dBm): -86

OK  
AT!SELRAT=1  
ERROR

---

<div class="post-metadata">

**Author:** ![jyijyi](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.sierrawireless.com/jyijyi/32/4766_2.png) [@jyijyi](https://forum.sierrawireless.com/u/jyijyi)\
**Post date:** [October 3, 2022, 5:12pm UTC](https://forum.sierrawireless.com/t/em7355-will-not-connect-to-verizon-lte/28011/8 "2022-10-03T17:12:03Z")

</div>

How about force to LTE by command at!selrat?  
You can see the option of at!selrat=?

---

<div class="post-metadata">

**Author:** ![Bryce](https://avatars.discourse-cdn.com/v4/letter/b/8edcca/32.png) [@Bryce](https://forum.sierrawireless.com/u/Bryce)\
**Post date:** [October 3, 2022, 6:32pm UTC](https://forum.sierrawireless.com/t/em7355-will-not-connect-to-verizon-lte/28011/9 "2022-10-03T18:32:53Z")

</div>

No luck with that either.

---

<div class="post-metadata">

**Author:** ![jyijyi](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.sierrawireless.com/jyijyi/32/4766_2.png) [@jyijyi](https://forum.sierrawireless.com/u/jyijyi)\
**Post date:** [October 4, 2022, 12:15am UTC](https://forum.sierrawireless.com/t/em7355-will-not-connect-to-verizon-lte/28011/10 "2022-10-04T00:15:46Z")

</div>

How do you set at!selrat?  
After forcing to LTE by at!selrat, what is at!gstatus?
