# Drivers for EM7595

**URL:** <https://forum.sierrawireless.com/t/drivers-for-em7595/35868>\
**Category:** IoT Modules\
**Tags:** driver\
**Created:** [May 19, 2026, 6:08am UTC](https://forum.sierrawireless.com/t/drivers-for-em7595/35868 "2026-05-19T06:08:35Z")\
**Posts on this page:** 1\
**Showing post:** 14

<div class="post-metadata">

**Author:** ![jyijyi](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.sierrawireless.com/jyijyi/32/4766_2.png) [@jyijyi](https://forum.sierrawireless.com/u/jyijyi)\
**Post date:** [June 5, 2026, 5:59am UTC](https://forum.sierrawireless.com/t/drivers-for-em7595/35868/14 "2026-06-05T05:59:41Z")

</div>

can you create the raw\_ip there by yourself?

> [@Example on establishing data connection by AT!SCACT via MBPL R20 driver](https://forum.sierrawireless.com/t/example-on-establishing-data-connection-by-at-scact-via-mbpl-r20-driver/24130):
>
> Here is an example to establish data connection by AT!SCACT via MBPL R20 driver: Module: WP7609 FW: R13 MBPL: R20 PC Environment: Ubuntu 18 need to install the MBPL R20 driver for qmi\_wwan and qcserial (MBPL\_Drivers\_USB\_R20\_ENG1-src.tar.gz) avoid the Ubuntu changing the network name: ln -s /dev/null /etc/systemd/network/99-default.link sudo apt-get install libqmi-utils sudo apt-get install udhcpc now insert the USB to PC sudo chmod 777 /sys/class/net/wwan0/qmi/raw\_ip …

I am not sure ppp dial up is supported, but you can have a try and see if there is any luck

---

_[View the full topic](https://forum.sierrawireless.com/t/drivers-for-em7595/35868)._