# Do virtual resources persist over a re-boot of the device?

**URL:** <https://forum.sierrawireless.com/t/do-virtual-resources-persist-over-a-re-boot-of-the-device/17734>\
**Category:** Octave FAQ\
**Tags:** faq\
**Created:** [September 30, 2019, 10:14am UTC](https://forum.sierrawireless.com/t/do-virtual-resources-persist-over-a-re-boot-of-the-device/17734 "2019-09-30T10:14:20Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![thibs](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.sierrawireless.com/thibs/32/953_2.png) [@thibs](https://forum.sierrawireless.com/u/thibs)\
**Post date:** [September 30, 2019, 10:14am UTC](https://forum.sierrawireless.com/t/do-virtual-resources-persist-over-a-re-boot-of-the-device/17734/1 "2019-09-30T10:14:20Z")

</div>

Yes if they are created as part of a device object. Virtual resources will not be stored over a reset if the are created via a stream or command.

Virtual resources that are not in sync with a blueprint, will be overwritten if a blueprint is deployed to the device.

---

<div class="post-metadata">

**Author:** ![djudkins](https://avatars.discourse-cdn.com/v4/letter/d/7ea924/32.png) [@djudkins](https://forum.sierrawireless.com/u/djudkins)\
**Post date:** [December 18, 2019, 8:30pm UTC](https://forum.sierrawireless.com/t/do-virtual-resources-persist-over-a-re-boot-of-the-device/17734/2 "2019-12-18T20:30:46Z")

</div>

As of firmware 2.1.1, virtual resource values can persist over a reboot .
