# Disabling trace messages

**URL:** <https://forum.sierrawireless.com/t/disabling-trace-messages/2663>\
**Category:** Development tools\
**Created:** [November 10, 2008, 1:29pm UTC](https://forum.sierrawireless.com/t/disabling-trace-messages/2663 "2008-11-10T13:29:57Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![psr](https://avatars.discourse-cdn.com/v4/letter/p/bcef8e/32.png) [@psr](https://forum.sierrawireless.com/u/psr)\
**Post date:** [November 10, 2008, 1:29pm UTC](https://forum.sierrawireless.com/t/disabling-trace-messages/2663/1 "2008-11-10T13:29:57Z")

</div>

In the target mode when I do an ftp for some reason there are trace messages spliting out the username and password on the trace window. Now I am not printing these traces and some lower level layer is printing these.  
Someone suggested that I use “wmmake myproject -d -release”. Now this disabled all my application level trace messages but the lower level traces continue to come.  
I would like to know if there is a way to diable all traces for production version.  
Thanks,  
PSR