# Determining version of Q2687 (H or G)

**URL:** <https://forum.sierrawireless.com/t/determining-version-of-q2687-h-or-g/3937>\
**Category:** Legacy AirPrime modules\
**Created:** [December 4, 2009, 8:28am UTC](https://forum.sierrawireless.com/t/determining-version-of-q2687-h-or-g/3937 "2009-12-04T08:28:35Z")\
**Posts on this page:** 1\
**Showing post:** 7

<div class="post-metadata">

**Author:** ![Madouc](https://avatars.discourse-cdn.com/v4/letter/m/b782af/32.png) [@Madouc](https://forum.sierrawireless.com/u/Madouc)\
**Post date:** [December 8, 2009, 8:45am UTC](https://forum.sierrawireless.com/t/determining-version-of-q2687-h-or-g/3937/7 "2009-12-08T08:45:45Z")

</div>

> [@davidc](#):
>
> Hiya,
> 
> > [@awneil](#):
> >
> > and by the fact that it says ‘G’ or ‘H’ in the ATI3 response:
> 
> You can’t rely on ATI3 - this is the module version reported from the Firmware, not the Hardware. As the original poster noted, it is possible to use DWLWin to flash the wrong firmware into a module (i.e. flash a ‘H’ with the ‘G’ firmware) - which may or may not break the module - and will return the wrong value from ATI3… ☹
> 
> ciao, Dave

but it’s still sad that DWLWIN ca’n determine the proper HW-version

---

_[View the full topic](https://forum.sierrawireless.com/t/determining-version-of-q2687-h-or-g/3937)._
