# Default value of keepalive packets interval

**URL:** <https://forum.sierrawireless.com/t/default-value-of-keepalive-packets-interval/3294>\
**Category:** Open AT\
**Created:** [June 3, 2009, 12:00pm UTC](https://forum.sierrawireless.com/t/default-value-of-keepalive-packets-interval/3294 "2009-06-03T12:00:20Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![srikanthsoma](https://avatars.discourse-cdn.com/v4/letter/s/a587f6/32.png) [@srikanthsoma](https://forum.sierrawireless.com/u/srikanthsoma)\
**Post date:** [June 3, 2009, 12:00pm UTC](https://forum.sierrawireless.com/t/default-value-of-keepalive-packets-interval/3294/1 "2009-06-03T12:00:20Z")

</div>

Hi,  
what is the default value of keepalive packets interval if i dont set it.

---

<div class="post-metadata">

**Author:** ![BenFT01](https://avatars.discourse-cdn.com/v4/letter/b/73ab20/32.png) [@BenFT01](https://forum.sierrawireless.com/u/BenFT01)\
**Post date:** [June 9, 2009, 10:54am UTC](https://forum.sierrawireless.com/t/default-value-of-keepalive-packets-interval/3294/2 "2009-06-09T10:54:18Z")

</div>

I’ve been told that the docs are wrong on this. This is the info I had.

> [@](#):
>
> WIP\_COPT\_KEEPALIVE u32 value is valid for FTP channels only. The NOOP command will be sent every x tenth of the second; its off by default.  
> WIP\_COPT\_KEEPALIVE for TCP channels is only of boolean relevance; you can either set or reset; by default its off. The KEEPALIVE is sent every 2 hrs.

Hope that helps. It was good news for me.
