# debugging   of gsm /cdma

**URL:** <https://forum.sierrawireless.com/t/debugging-of-gsm-cdma/1616>\
**Category:** General wireless topics\
**Created:** [September 21, 2007, 4:13am UTC](https://forum.sierrawireless.com/t/debugging-of-gsm-cdma/1616 "2007-09-21T04:13:23Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![rajapodapati](https://avatars.discourse-cdn.com/v4/letter/r/a88e4f/32.png) [@rajapodapati](https://forum.sierrawireless.com/u/rajapodapati)\
**Post date:** [September 21, 2007, 4:13am UTC](https://forum.sierrawireless.com/t/debugging-of-gsm-cdma/1616/1 "2007-09-21T04:13:23Z")

</div>

Give hardware connection details for how to write on flash of (Q24series)cdma/gsmchips.  
is there any possibility to write to flash via microcontroller? please give harware details regarding this.

---

<div class="post-metadata">

**Author:** ![awneil](https://avatars.discourse-cdn.com/v4/letter/a/49beb7/32.png) [@awneil](https://forum.sierrawireless.com/u/awneil)\
**Post date:** [September 21, 2007, 6:54am UTC](https://forum.sierrawireless.com/t/debugging-of-gsm-cdma/1616/2 "2007-09-21T06:54:20Z")

</div>

Have you actually looked at the Datasheets for the Q24 Series?

You program them with the Wavecom AT+WDWL command.

> [@rajapodapati](#):
>
> is there any possibility to write to flash via microcontroller?

Yes, you can send AT commands with a microcontroller!

But why would you want to?

The whole point of Open-AT is that it allows you to use the module as a microcontroller - thus obviating the need for an external microcontroller!

---

<div class="post-metadata">

**Author:** ![tobias](https://avatars.discourse-cdn.com/v4/letter/t/c67d28/32.png) [@tobias](https://forum.sierrawireless.com/u/tobias)\
**Post date:** [September 21, 2007, 7:21am UTC](https://forum.sierrawireless.com/t/debugging-of-gsm-cdma/1616/3 "2007-09-21T07:21:20Z")

</div>

There are situations where you might want to use an external microcontroller. It all really depends on your needs, and for 99.99% of your needs, you’re not likely to need it.

---

<div class="post-metadata">

**Author:** ![awneil](https://avatars.discourse-cdn.com/v4/letter/a/49beb7/32.png) [@awneil](https://forum.sierrawireless.com/u/awneil)\
**Post date:** [September 24, 2007, 3:42pm UTC](https://forum.sierrawireless.com/t/debugging-of-gsm-cdma/1616/4 "2007-09-24T15:42:40Z")

</div>

See: [wavecom.com/modules/movie/sc … php?p=6251](http://www.wavecom.com/modules/movie/scenes/forums/viewtopic.php?p=6251)
