# Debugging kernel panic traces during the kernel boot on the wp76xx

**URL:** <https://forum.sierrawireless.com/t/debugging-kernel-panic-traces-during-the-kernel-boot-on-the-wp76xx/19994>\
**Category:** WP Series\
**Created:** [April 6, 2020, 7:05pm UTC](https://forum.sierrawireless.com/t/debugging-kernel-panic-traces-during-the-kernel-boot-on-the-wp76xx/19994 "2020-04-06T19:05:50Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![martin2](https://avatars.discourse-cdn.com/v4/letter/m/9de053/32.png) [@martin2](https://forum.sierrawireless.com/u/martin2)\
**Post date:** [April 6, 2020, 7:05pm UTC](https://forum.sierrawireless.com/t/debugging-kernel-panic-traces-during-the-kernel-boot-on-the-wp76xx/19994/1 "2020-04-06T19:05:50Z")

</div>

Hi,

We are currently backporting some wl18xx drivers into a custom board based on the wp76xx but a change to use the vmmc-supply property in the device tree has stopped the kernel from booting. The console only gives us this information:  
[1.161110] BUG: spinlock already unlocked on CPU#0, kworker/u2:0/6  
[1.166345] lock: 0xcd8dc5b0, .magic: dead4ead, .owner: /-1, .owner\_cpu: -1  
[1.174073] Causing a watchdog bite!

It looks like the loglevel is set fairly low, is there a way of altering the bootargs= kernel cmdline parameter so we can see the full console output? Or is there something else from stopping the complete kernel panic trace from appearing.

Any help is greatly appreciated,  
Martin.

---

<div class="post-metadata">

**Author:** ![lotam](https://avatars.discourse-cdn.com/v4/letter/l/958977/32.png) [@lotam](https://forum.sierrawireless.com/u/lotam)\
**Post date:** [May 5, 2020, 4:29am UTC](https://forum.sierrawireless.com/t/debugging-kernel-panic-traces-during-the-kernel-boot-on-the-wp76xx/19994/2 "2020-05-05T04:29:01Z")

</div>

Hi Martin,  
Welcome to the forum!

Are you able to flash Yocto image on this unit?  
If yes, please try flash the official Sierra image then send below AT command to disable “quiet” option and see does it print enough log to debug.

```
AT!ENTERCND="A710"
AT!CUSTOM="BOOTQUIETDISABLE",1
AT!RESET

```

Hope it helps.  
Thx
