# Debugging edge actions, console.log rarely works

**URL:** <https://forum.sierrawireless.com/t/debugging-edge-actions-console-log-rarely-works/23401>\
**Category:** Octave\
**Tags:** debug\
**Created:** [April 12, 2021, 12:25pm UTC](https://forum.sierrawireless.com/t/debugging-edge-actions-console-log-rarely-works/23401 "2021-04-12T12:25:19Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![jerdung](https://avatars.discourse-cdn.com/v4/letter/j/82dd89/32.png) [@jerdung](https://forum.sierrawireless.com/u/jerdung)\
**Post date:** [April 13, 2021, 8:39am UTC](https://forum.sierrawireless.com/t/debugging-edge-actions-console-log-rarely-works/23401/2 "2021-04-13T08:39:46Z")

</div>

Hi jj1,

Here are configurations that may help you :

- On Octave cloud, make sure Developer Mode is enabled as the picture below:  

- On ssh session, try to set log level by command “log level debug”

Please note that your Edge action is started when your linked observation knows there is a change from a resource.

Thanks,

---

_[View the full topic](https://forum.sierrawireless.com/t/debugging-edge-actions-console-log-rarely-works/23401)._