# Customize Charset

**URL:** <https://forum.sierrawireless.com/t/customize-charset/907>\
**Category:** Legacy FX/FXT series\
**Created:** [December 1, 2006, 2:16am UTC](https://forum.sierrawireless.com/t/customize-charset/907 "2006-12-01T02:16:15Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![cksl](https://avatars.discourse-cdn.com/v4/letter/c/848f3c/32.png) [@cksl](https://forum.sierrawireless.com/u/cksl)\
**Post date:** [December 1, 2006, 2:16am UTC](https://forum.sierrawireless.com/t/customize-charset/907/1 "2006-12-01T02:16:15Z")

</div>

Dear all,

I am using Fasttrack M1306B. Is there anyway that I can receive the character ~ @ $ \> \< in one charset? If I require to use AT+CSCS=“CUSTOM”, that how can I configure it so that I can detect those character at the same time?

If I use AT+CSCS=“PCCP437”, then I only can read @ $ in my sms but not ~.

Thanks!

Best regards,  
Chris

---

<div class="post-metadata">

**Author:** ![awneil](https://avatars.discourse-cdn.com/v4/letter/a/49beb7/32.png) [@awneil](https://forum.sierrawireless.com/u/awneil)\
**Post date:** [December 1, 2006, 8:47am UTC](https://forum.sierrawireless.com/t/customize-charset/907/2 "2006-12-01T08:47:20Z")

</div>

[wavecom.com/modules/movie/sc … .php?t=924](http://www.wavecom.com/modules/movie/scenes/forums/viewtopic.php?t=924)

It is polite to say when you’re cross-posting, so that people don’t waste their time duplicating replies, and other interested parties can monitor the full discussion.