# Creating PCB Footprint for HL7648

**URL:** <https://forum.sierrawireless.com/t/creating-pcb-footprint-for-hl7648/13929>\
**Category:** Legacy HL Series\
**Created:** [September 21, 2018, 4:47pm UTC](https://forum.sierrawireless.com/t/creating-pcb-footprint-for-hl7648/13929 "2018-09-21T16:47:48Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![kylew](https://avatars.discourse-cdn.com/v4/letter/k/3bc359/32.png) [@kylew](https://forum.sierrawireless.com/u/kylew)\
**Post date:** [September 21, 2018, 4:47pm UTC](https://forum.sierrawireless.com/t/creating-pcb-footprint-for-hl7648/13929/1 "2018-09-21T16:47:48Z")

</div>

Hello,

I have looked through the product technical specs for the HL7648 when trying to make the PCB footprint in Altium, and although I have found information for pad size, I have not seen any dimensions that show where the pads are actually located in the package. There is a chance I am misreading some of the dimensions or missing something in the document, but I thought I would ask in case there is information I need that is not listed in the PTS.

Attached is a photoa showing all of the information provided in the PTS on the connection interface.

 ![18-09-21-Connection-Interface](https://us1.discourse-cdn.com/flex025/uploads/sierrawireless/original/2X/2/236861d042dd0a9bdcc1f0fd727f4f42f414cb63.jpeg)

As a new user, I can only upload one photo in a topic, the other pictures I would have uploaded would be pages 33 and 34 of the PTS for reference.

Thank you,  
Kyle

---

<div class="post-metadata">

**Author:** ![kylew](https://avatars.discourse-cdn.com/v4/letter/k/3bc359/32.png) [@kylew](https://forum.sierrawireless.com/u/kylew)\
**Post date:** [September 21, 2018, 9:33pm UTC](https://forum.sierrawireless.com/t/creating-pcb-footprint-for-hl7648/13929/2 "2018-09-21T21:33:36Z")

</div>

I was looking at a version of the PTS that did not include the page I needed (I downloaded the PTS from Digi-Key, but the actual full PTS has the information I need).

---

<div class="post-metadata">

**Author:** ![Sierra\_klin2](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.sierrawireless.com/sierra_klin2/32/4769_2.png) [@Sierra\_klin2](https://forum.sierrawireless.com/u/Sierra_klin2)\
**Post date:** [October 15, 2018, 8:32am UTC](https://forum.sierrawireless.com/t/creating-pcb-footprint-for-hl7648/13929/3 "2018-10-15T08:32:44Z")

</div>

Hi Kyle,

Pleaser refer to the HL7648 - Product Technical Specification Version 10.0.  
You can download from our source:  
[https://source.sierrawireless.com/resources/airprime/hardware\_specs\_user\_guides/airprime\_hl7648\_product\_technical\_specification/](https://source.sierrawireless.com/resources/airprime/hardware_specs_user_guides/airprime_hl7648_product_technical_specification/)
