# Connecting remote server with GPRS using SL8082

**URL:** <https://forum.sierrawireless.com/t/connecting-remote-server-with-gprs-using-sl8082/5279>\
**Category:** Legacy AirPrime modules\
**Created:** [October 4, 2011, 10:10am UTC](https://forum.sierrawireless.com/t/connecting-remote-server-with-gprs-using-sl8082/5279 "2011-10-04T10:10:22Z")\
**Posts on this page:** 1\
**Showing post:** 1

<div class="post-metadata">

**Author:** ![sujataingale](https://avatars.discourse-cdn.com/v4/letter/s/c67d28/32.png) [@sujataingale](https://forum.sierrawireless.com/u/sujataingale)\
**Post date:** [October 4, 2011, 10:10am UTC](https://forum.sierrawireless.com/t/connecting-remote-server-with-gprs-using-sl8082/5279/1 "2011-10-04T10:10:22Z")

</div>

Hi,  
Has anybody worked on interfacing the SL8082 for GPRS data communication with Remote server using TCP/ip.  
I am facing some problem in PAD(Packet assembler/Deassembler) commnads.  
I am getting the following responses,

//To initiate PDP context

AT+CGREG  
0,1

AT+CMGF=1  
ok

AT+CGDCONT=1,“IP”,“internet”  
OK

AT+CGQREQ=1,1,4,5,2,14  
OK

AT+CGQMIN=1,1,4,5,2,31  
OK

AT+CGATT=1  
OK

AT+CGACT=1,1  
OK

////To connect with the Remote server, i am using following commands,  
AT!PADCONF=2,65,1,1,1,48 //PAd config  
OK

AT!PADSETUP=2,2,10.137.176.255,0,2134,0,5 //Pad setup for remote server, ip address & Port number  
OK

But for the command

AT!PADCONN=2  
ERROR

Can anyone tell me where i might be wrong?  
I am able to communicate with remote server from outside, but not with the SL8082.

Thanks in advance

---

_[View the full topic](https://forum.sierrawireless.com/t/connecting-remote-server-with-gprs-using-sl8082/5279)._
