# Compiler WP7702 error

**URL:** <https://forum.sierrawireless.com/t/compiler-wp7702-error/29698>\
**Category:** WP Series\
**Created:** [May 5, 2023, 6:03am UTC](https://forum.sierrawireless.com/t/compiler-wp7702-error/29698 "2023-05-05T06:03:00Z")\
**Posts on this page:** 20\
**Page:** 1

<div class="post-metadata">

**Author:** ![larry1](https://avatars.discourse-cdn.com/v4/letter/l/f14d63/32.png) [@larry1](https://forum.sierrawireless.com/u/larry1)\
**Post date:** [May 5, 2023, 6:03am UTC](https://forum.sierrawireless.com/t/compiler-wp7702-error/29698/1 "2023-05-05T06:03:00Z")

</div>

Hi,

I downloaded [SWI9X06Y\_02.22.12.00 Source](https://downloads.sierrawireless.com/AirPrime/WP77xx/Release11/Legato-Dist-Source-mdm9x06-SWI9X06Y_02.22.12.00.tar.bz2)

and compiled it, but I got error.  
Log is below"

```auto
WARNING: Unable to get checksum for linux-quic SRC_URI entry sierra: [Errno 2] No such file or directory: '/home/test/workspace/yocto/kernel/./arch/arm/mach-msm/sierra/sierra' | ETA: 0:00:06
Initialising tasks: 100% |###################################################################################################################################################################| Time: 0:00:11
NOTE: Executing SetScene Tasks
NOTE: Executing RunQueue Tasks
ERROR: android-signing-native-1.0-r1 do_fetch: Fetcher failure: Fetch command export DBUS_SESSION_BUS_ADDRESS="unix:abstract=/tmp/dbus-WGYkBrfTN3"; export SSH_AUTH_SOCK="/run/user/1000/keyring/ssh"; export PATH="/home/test/workspace/yocto/poky/scripts/native-intercept:/home/test/workspace/yocto/build_bin/tmp/sysroots-uninative/x86_64-linux/usr/bin:/home/test/workspace/yocto/poky/scripts:/home/test/workspace/yocto/build_bin/tmp/sysroots/x86_64-linux/usr/bin/x86_64-linux:/home/test/workspace/yocto/build_bin/tmp/sysroots/x86_64-linux/usr/bin:/home/test/workspace/yocto/build_bin/tmp/sysroots/x86_64-linux/usr/sbin:/home/test/workspace/yocto/build_bin/tmp/sysroots/x86_64-linux/usr/bin:/home/test/workspace/yocto/build_bin/tmp/sysroots/x86_64-linux/sbin:/home/test/workspace/yocto/build_bin/tmp/sysroots/x86_64-linux/bin:/home/test/workspace/yocto/poky/scripts:/home/test/workspace/yocto/poky/bitbake/bin:/usr/local/bin:/bin:/usr/bin"; export HOME="/home/test"; git -c core.fsyncobjectfiles=0 ls-remote git://github.com/braddu/android-signing.git failed with exit code 128, output:
fatal: unable to connect to github.com:
github.com[0: 20.27.177.113]: errno=Connection refused

ERROR: android-signing-native-1.0-r1 do_fetch: Function failed: base_do_fetch
ERROR: Logfile of failure stored in: /home/test/workspace/yocto/build_bin/tmp/work/x86_64-linux/android-signing-native/1.0-r1/temp/log.do_fetch.64354
ERROR: Task (/home/test/workspace/yocto/meta-swi/meta-swi-mdm9xxx/recipes-bsp/android-signing/android-signing-native.bb:do_fetch) failed with exit code '1'
NOTE: Tasks Summary: Attempted 748 tasks of which 714 didn't need to be rerun and 1 failed.

```

How can I fix it?  
I think error is in here.

```auto
fatal: unable to connect to github.com:
github.com[0: 20.27.177.113]: errno=Connection refused

```

Thanks!!!

---

<div class="post-metadata">

**Author:** ![jyijyi](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.sierrawireless.com/jyijyi/32/4766_2.png) [@jyijyi](https://forum.sierrawireless.com/u/jyijyi)\
**Post date:** [May 5, 2023, 6:06am UTC](https://forum.sierrawireless.com/t/compiler-wp7702-error/29698/2 "2023-05-05T06:06:28Z")

</div>

does this help?

> <https://stackoverflow.com/questions/16298986/unable-to-connect-to-github-com-for-cloning>

---

<div class="post-metadata">

**Author:** ![larry1](https://avatars.discourse-cdn.com/v4/letter/l/f14d63/32.png) [@larry1](https://forum.sierrawireless.com/u/larry1)\
**Post date:** [May 5, 2023, 6:13am UTC](https://forum.sierrawireless.com/t/compiler-wp7702-error/29698/3 "2023-05-05T06:13:11Z")

</div>

Hi @jyijyi ,

Thanks for your help.

I modify android-signing-native.bb file and let it use https and it worked.

---

<div class="post-metadata">

**Author:** ![larry1](https://avatars.discourse-cdn.com/v4/letter/l/f14d63/32.png) [@larry1](https://forum.sierrawireless.com/u/larry1)\
**Post date:** [May 5, 2023, 6:31am UTC](https://forum.sierrawireless.com/t/compiler-wp7702-error/29698/4 "2023-05-05T06:31:43Z")

</div>

Hi @jyijyi ,

I got other problem

```auto
WARNING: Unable to get checksum for linux-quic SRC_URI entry sierra: [Errno 2] No such file or directory: '/home/test/workspace/yocto/kernel/./arch/arm/mach-msm/sierra/sierra' | ETA: 0:00:07
Initialising tasks: 100% |###################################################################################################################################################################| Time: 0:00:11
NOTE: Executing SetScene Tasks
NOTE: Executing RunQueue Tasks
ERROR: linux-quic-3.18.44-r1 do_populate_sysroot: runstrip: ''arm-poky-linux-gnueabi-strip' --remove-section=.comment --remove-section=.note '/home/test/workspace/yocto/build_bin/tmp/work/swi_mdm9x28_wp-poky-linux-gnueabi/linux-quic/3.18.44-r1/sysroot-destdir/usr/src/kernel/scripts/basic/fixdep'' strip command failed with 1 (b'arm-poky-linux-gnueabi-strip:/home/test/workspace/yocto/build_bin/tmp/work/swi_mdm9x28_wp-poky-linux-gnueabi/linux-quic/3.18.44-r1/sysroot-destdir/usr/src/kernel/scripts/basic/fixdep: File format not recognized\n')
ERROR: linux-quic-3.18.44-r1 do_populate_sysroot: runstrip: ''arm-poky-linux-gnueabi-strip' --remove-section=.comment --remove-section=.note '/home/test/workspace/yocto/build_bin/tmp/work/swi_mdm9x28_wp-poky-linux-gnueabi/linux-quic/3.18.44-r1/sysroot-destdir/usr/src/kernel/scripts/kconfig/mconf'' strip command failed with 1 (b'arm-poky-linux-gnueabi-strip:/home/test/workspace/yocto/build_bin/tmp/work/swi_mdm9x28_wp-poky-linux-gnueabi/linux-quic/3.18.44-r1/sysroot-destdir/usr/src/kernel/scripts/kconfig/mconf: File format not recognized\n')
ERROR: linux-quic-3.18.44-r1 do_package: objcopy failed with exit code 1 (cmd was 'arm-poky-linux-gnueabi-objcopy' --only-keep-debug '/home/test/workspace/yocto/build_bin/tmp/work/swi_mdm9x28_wp-poky-linux-gnueabi/linux-quic/3.18.44-r1/package/usr/src/kernel/scripts/basic/fixdep' '/home/test/workspace/yocto/build_bin/tmp/work/swi_mdm9x28_wp-poky-linux-gnueabi/linux-quic/3.18.44-r1/package/usr/src/kernel/scripts/basic/.debug/fixdep'):
arm-poky-linux-gnueabi-objcopy:/home/test/workspace/yocto/build_bin/tmp/work/swi_mdm9x28_wp-poky-linux-gnueabi/linux-quic/3.18.44-r1/package/usr/src/kernel/scripts/basic/fixdep: File format not recognized
ERROR: linux-quic-3.18.44-r1 do_package: Function failed: split_and_strip_files
ERROR: Logfile of failure stored in: /home/test/workspace/yocto/build_bin/tmp/work/swi_mdm9x28_wp-poky-linux-gnueabi/linux-quic/3.18.44-r1/temp/log.do_package.100943
ERROR: Task (/home/test/workspace/yocto/meta-swi/meta-swi-mdm9x28/recipes-kernel/linux/linux-quic_git.bb:do_package) failed with exit code '1'

```

What does it mean “File format not recognized” ?

---

<div class="post-metadata">

**Author:** ![jyijyi](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.sierrawireless.com/jyijyi/32/4766_2.png) [@jyijyi](https://forum.sierrawireless.com/u/jyijyi)\
**Post date:** [May 5, 2023, 6:39am UTC](https://forum.sierrawireless.com/t/compiler-wp7702-error/29698/5 "2023-05-05T06:39:29Z")

</div>

can you try with WP76 FW 16.0.1 yocto rebuild?

[https://source.sierrawireless.com/resources/airprime/software/wp76xx/wp76xx-firmware-release-16,-d-,0,-d-,1-components/#sthash.Yl5TgbAR.dpbs](https://source.sierrawireless.com/resources/airprime/software/wp76xx/wp76xx-firmware-release-16,-d-,0,-d-,1-components/#sthash.Yl5TgbAR.dpbs)

I want to make sure your PC has no problem in building yocto image.

---

<div class="post-metadata">

**Author:** ![larry1](https://avatars.discourse-cdn.com/v4/letter/l/f14d63/32.png) [@larry1](https://forum.sierrawireless.com/u/larry1)\
**Post date:** [May 5, 2023, 6:47am UTC](https://forum.sierrawireless.com/t/compiler-wp7702-error/29698/6 "2023-05-05T06:47:40Z")

</div>

Hi @jyijyi ,

my build information is below:

```auto
Build Configuration:
BB_VERSION = "1.32.0"
BUILD_SYS = "x86_64-linux"
NATIVELSBSTRING = "universal"
TARGET_SYS = "arm-poky-linux-gnueabi"
MACHINE = "swi-mdm9x28-wp"
DISTRO = "poky-swi-ext"
DISTRO_VERSION = "2.2.3"
TUNE_FEATURES = "arm armv7a vfp neon"
TARGET_FPU = "softfp"
meta              
meta-poky         
meta-yocto-bsp = "HEAD:e6aadcc2a04ae4e85b1cb00c5c9ce1c0f76ee871"
meta-python       
meta-networking   
meta-oe = "HEAD:b40116cf457b88a2db14b86fda9627fb34d56ae6"
common = "HEAD:d29b389387fb0c5a12c8f8285f31bc89418a734f"
meta-fortune = "HEAD:b40116cf457b88a2db14b86fda9627fb34d56ae6"
meta-swi-mdm9xxx  
meta-swi-mdm9x28 = "HEAD:d29b389387fb0c5a12c8f8285f31bc89418a734f"
meta-swi-mdm9xxx-bin 
meta-swi-mdm9x28-bin 
meta-swi-mdm9x28-wp-bin 
meta-swi-mdm9x28  
meta-swi-mdm9xxx-bin 
meta-swi-mdm9x28-bin 
meta-swi-mdm9x28-wp-bin 
common = "HEAD:4f585ea5a8949b79b566860a667d1f082aafeec0"

```

If you want me use R16 version I need more time.

By the way the system I already compiled before I do make clean.

---

<div class="post-metadata">

**Author:** ![jyijyi](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.sierrawireless.com/jyijyi/32/4766_2.png) [@jyijyi](https://forum.sierrawireless.com/u/jyijyi)\
**Post date:** [May 5, 2023, 6:53am UTC](https://forum.sierrawireless.com/t/compiler-wp7702-error/29698/7 "2023-05-05T06:53:41Z")

</div>

> > > By the way the system I already compiled before I do make clean

You mean for WP77 yocto build? Can you build now?

---

<div class="post-metadata">

**Author:** ![larry1](https://avatars.discourse-cdn.com/v4/letter/l/f14d63/32.png) [@larry1](https://forum.sierrawireless.com/u/larry1)\
**Post date:** [May 5, 2023, 6:56am UTC](https://forum.sierrawireless.com/t/compiler-wp7702-error/29698/8 "2023-05-05T06:56:49Z")

</div>

Hi @jyijyi ,

I built WP77 before I do make clean.  
But now I can’t build success, so I don’t know why.

---

<div class="post-metadata">

**Author:** ![jyijyi](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.sierrawireless.com/jyijyi/32/4766_2.png) [@jyijyi](https://forum.sierrawireless.com/u/jyijyi)\
**Post date:** [May 5, 2023, 7:00am UTC](https://forum.sierrawireless.com/t/compiler-wp7702-error/29698/9 "2023-05-05T07:00:33Z")

</div>

didn’t you should  
make clean and then build wp77?

---

<div class="post-metadata">

**Author:** ![larry1](https://avatars.discourse-cdn.com/v4/letter/l/f14d63/32.png) [@larry1](https://forum.sierrawireless.com/u/larry1)\
**Post date:** [May 5, 2023, 7:01am UTC](https://forum.sierrawireless.com/t/compiler-wp7702-error/29698/10 "2023-05-05T07:01:54Z")

</div>

Hi @jyijyi ,

I don’t understand why I didn’t should make clean or I should make clean again ?

then execute make MACH=mdm9x28 PROD=wp ?

---

<div class="post-metadata">

**Author:** ![jyijyi](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.sierrawireless.com/jyijyi/32/4766_2.png) [@jyijyi](https://forum.sierrawireless.com/u/jyijyi)\
**Post date:** [May 5, 2023, 7:05am UTC](https://forum.sierrawireless.com/t/compiler-wp7702-error/29698/11 "2023-05-05T07:05:10Z")

</div>

didn’t you are compiling the wp77 yocto source? OR FX30?  
For WP77, you can try:

make clean  
make

---

<div class="post-metadata">

**Author:** ![larry1](https://avatars.discourse-cdn.com/v4/letter/l/f14d63/32.png) [@larry1](https://forum.sierrawireless.com/u/larry1)\
**Post date:** [May 5, 2023, 7:10am UTC](https://forum.sierrawireless.com/t/compiler-wp7702-error/29698/12 "2023-05-05T07:10:40Z")

</div>

Hi @jyijyi ,

I use two computer to build WP77 and FX30.

In FX30 I need set github do you know how to setup it?  
In WP77 I do make clean then make image\_bin now.

---

<div class="post-metadata">

**Author:** ![jyijyi](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.sierrawireless.com/jyijyi/32/4766_2.png) [@jyijyi](https://forum.sierrawireless.com/u/jyijyi)\
**Post date:** [May 5, 2023, 7:21am UTC](https://forum.sierrawireless.com/t/compiler-wp7702-error/29698/13 "2023-05-05T07:21:13Z")

</div>

does this help?

> [@FOTA for FX30S how to](https://forum.sierrawireless.com/t/fota-for-fx30s-how-to/23229/170):
>
> Hi @claudio.baldini, I’ve pulled and built the swi-fx30-catm\_2.0.0 and it runs without issue. I’m using a Ubuntu 16.04 machine, but 18.04 should be fine as well. Here is the procedure I used: Create a workspace folder: $ mkdir leaf-fx30-catm\_2.0.0 $ cd leaf-fx30-catm\_2.0.0 Initialize the workspace for Leaf $ leaf init Setup the workspace $ leaf setup -p swi-fx30-catm\_2.0.0 Pull the yocto workspace $ leaf getsrc swi-linux Edit the FX30 Makefile $ cd swi-linux-src/ $ vi Makefile Mod…

---

<div class="post-metadata">

**Author:** ![larry1](https://avatars.discourse-cdn.com/v4/letter/l/f14d63/32.png) [@larry1](https://forum.sierrawireless.com/u/larry1)\
**Post date:** [May 5, 2023, 7:34am UTC](https://forum.sierrawireless.com/t/compiler-wp7702-error/29698/14 "2023-05-05T07:34:16Z")

</div>

Hi @jyijyi

In FX30 I got the same error

```auto
Something went wrong when trying to connect to ssh://git@github.com/legatoproject/manifest

```

---

<div class="post-metadata">

**Author:** ![jyijyi](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.sierrawireless.com/jyijyi/32/4766_2.png) [@jyijyi](https://forum.sierrawireless.com/u/jyijyi)\
**Post date:** [May 5, 2023, 8:06am UTC](https://forum.sierrawireless.com/t/compiler-wp7702-error/29698/15 "2023-05-05T08:06:01Z")

</div>

does this help to set it to http?

> <https://stackoverflow.com/questions/70663523/the-unauthenticated-git-protocol-on-port-9418-is-no-longer-supported>

---

<div class="post-metadata">

**Author:** ![larry1](https://avatars.discourse-cdn.com/v4/letter/l/f14d63/32.png) [@larry1](https://forum.sierrawireless.com/u/larry1)\
**Post date:** [May 5, 2023, 8:31am UTC](https://forum.sierrawireless.com/t/compiler-wp7702-error/29698/16 "2023-05-05T08:31:04Z")

</div>

> [@larry1](#):
>
> `rying `

Hi @jyijyi ,

I use “leaf getsrc legato” where can I modify it ?

---

<div class="post-metadata">

**Author:** ![larry1](https://avatars.discourse-cdn.com/v4/letter/l/f14d63/32.png) [@larry1](https://forum.sierrawireless.com/u/larry1)\
**Post date:** [May 5, 2023, 8:59am UTC](https://forum.sierrawireless.com/t/compiler-wp7702-error/29698/17 "2023-05-05T08:59:55Z")

</div>

Hi @jyijyi ,

In WP77 I try again and got the same error

```auto
WARNING: Unable to get checksum for linux-quic SRC_URI entry sierra: [Errno 2] No such file or directory: '/home/test/workspace/yocto/kernel/./arch/arm/mach-msm/sierra/sierra' | ETA: 0:00:07
Initialising tasks: 100% |###################################################################################################################################################################| Time: 0:02:04
NOTE: Executing SetScene Tasks
NOTE: Executing RunQueue Tasks
ERROR: linux-quic-3.18.44-r1 do_populate_sysroot: runstrip: ''arm-poky-linux-gnueabi-strip' --remove-section=.comment --remove-section=.note '/home/test/workspace/yocto/build_bin/tmp/work/swi_mdm9x28_wp-poky-linux-gnueabi/linux-quic/3.18.44-r1/sysroot-destdir/usr/src/kernel/scripts/basic/fixdep'' strip command failed with 1 (b'arm-poky-linux-gnueabi-strip:/home/test/workspace/yocto/build_bin/tmp/work/swi_mdm9x28_wp-poky-linux-gnueabi/linux-quic/3.18.44-r1/sysroot-destdir/usr/src/kernel/scripts/basic/fixdep: File format not recognized\n')
ERROR: linux-quic-3.18.44-r1 do_populate_sysroot: runstrip: ''arm-poky-linux-gnueabi-strip' --remove-section=.comment --remove-section=.note '/home/test/workspace/yocto/build_bin/tmp/work/swi_mdm9x28_wp-poky-linux-gnueabi/linux-quic/3.18.44-r1/sysroot-destdir/usr/src/kernel/scripts/kconfig/mconf'' strip command failed with 1 (b'arm-poky-linux-gnueabi-strip:/home/test/workspace/yocto/build_bin/tmp/work/swi_mdm9x28_wp-poky-linux-gnueabi/linux-quic/3.18.44-r1/sysroot-destdir/usr/src/kernel/scripts/kconfig/mconf: File format not recognized\n')
ERROR: linux-quic-3.18.44-r1 do_package: objcopy failed with exit code 1 (cmd was 'arm-poky-linux-gnueabi-objcopy' --only-keep-debug '/home/test/workspace/yocto/build_bin/tmp/work/swi_mdm9x28_wp-poky-linux-gnueabi/linux-quic/3.18.44-r1/package/usr/src/kernel/scripts/kconfig/mconf' '/home/test/workspace/yocto/build_bin/tmp/work/swi_mdm9x28_wp-poky-linux-gnueabi/linux-quic/3.18.44-r1/package/usr/src/kernel/scripts/kconfig/.debug/mconf'):
arm-poky-linux-gnueabi-objcopy:/home/test/workspace/yocto/build_bin/tmp/work/swi_mdm9x28_wp-poky-linux-gnueabi/linux-quic/3.18.44-r1/package/usr/src/kernel/scripts/kconfig/mconf: File format not recognized
ERROR: linux-quic-3.18.44-r1 do_package: Function failed: split_and_strip_files
ERROR: Logfile of failure stored in: /home/test/workspace/yocto/build_bin/tmp/work/swi_mdm9x28_wp-poky-linux-gnueabi/linux-quic/3.18.44-r1/temp/log.do_package.83191
ERROR: Task (/home/test/workspace/yocto/meta-swi/meta-swi-mdm9x28/recipes-kernel/linux/linux-quic_git.bb:do_package) failed with exit code '1'
NOTE: Tasks Summary: Attempted 942 tasks of which 0 didn't need to be rerun and 1 failed.

```

How do I fix it ?  
I have no idea to fix it.

---

<div class="post-metadata">

**Author:** ![jyijyi](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.sierrawireless.com/jyijyi/32/4766_2.png) [@jyijyi](https://forum.sierrawireless.com/u/jyijyi)\
**Post date:** [May 5, 2023, 9:00am UTC](https://forum.sierrawireless.com/t/compiler-wp7702-error/29698/18 "2023-05-05T09:00:44Z")

</div>

you can try with WP76 FW16.0.1 yocto build and see if it has problem.  
this is to make sure your PC is OK to build image.

---

<div class="post-metadata">

**Author:** ![jyijyi](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.sierrawireless.com/jyijyi/32/4766_2.png) [@jyijyi](https://forum.sierrawireless.com/u/jyijyi)\
**Post date:** [May 5, 2023, 9:04am UTC](https://forum.sierrawireless.com/t/compiler-wp7702-error/29698/19 "2023-05-05T09:04:09Z")

</div>

if you just wanna get the legato source, you can use VSCode+LEAF plugin to download

> **[Legato Plugin for VSCode - Legato Docs](https://docs.legato.io/latest/tools_vsCode.html)**
>
> legato™ is an open source Linux-based embedded platform designed to simplify connected IoT application development

---

<div class="post-metadata">

**Author:** ![larry1](https://avatars.discourse-cdn.com/v4/letter/l/f14d63/32.png) [@larry1](https://forum.sierrawireless.com/u/larry1)\
**Post date:** [May 9, 2023, 12:46am UTC](https://forum.sierrawireless.com/t/compiler-wp7702-error/29698/20 "2023-05-09T00:46:17Z")

</div>

Hi @jyijyi ,

Following your suggestion use R16.0.1 in WP76xx, I got many like the error

```auto
ERROR: dtbtool-native-git-r0 do_fetch: Fetcher failure: Fetch command export PSEUDO_DISABLED=1; export PATH="/home/test/workspace/yocto/poky/scripts/native-intercept:/home/test/workspace/yocto/build_bin/tmp/sysroots-uninative/i686-linux/usr/bin:/home/test/workspace/yocto/poky/scripts:/home/test/workspace/yocto/build_bin/tmp/work/i686-linux/dtbtool-native/git-r0/recipe-sysroot-native/usr/bin/i686-linux:/home/test/workspace/yocto/build_bin/tmp/work/i686-linux/dtbtool-native/git-r0/recipe-sysroot-native/usr/bin:/home/test/workspace/yocto/build_bin/tmp/work/i686-linux/dtbtool-native/git-r0/recipe-sysroot-native/usr/sbin:/home/test/workspace/yocto/build_bin/tmp/work/i686-linux/dtbtool-native/git-r0/recipe-sysroot-native/usr/bin:/home/test/workspace/yocto/build_bin/tmp/work/i686-linux/dtbtool-native/git-r0/recipe-sysroot-native/sbin:/home/test/workspace/yocto/build_bin/tmp/work/i686-linux/dtbtool-native/git-r0/recipe-sysroot-native/bin:/home/test/workspace/yocto/poky/bitbake/bin:/home/test/workspace/yocto/build_bin/tmp/hosttools"; export HOME="/home/test"; LANG=C git -c core.fsyncobjectfiles=0 clone --bare --mirror https://codeaurora.org/device/qcom/common /home/test/workspace/yocto/build_bin/downloads/git2/codeaurora.org.device.qcom.common --progress failed with exit code 128, output:
Cloning into bare repository '/home/test/workspace/yocto/build_bin/downloads/git2/codeaurora.org.device.qcom.common'...
fatal: unable to access 'https://codeaurora.org/device/qcom/common/': server certificate verification failed. CAfile: /etc/ssl/certs/ca-certificates.crt CRLfile: none

ERROR: dtbtool-native-git-r0 do_fetch: Fetcher failure for URL: 'git://codeaurora.org/device/qcom/common;branch=jb_rb5.1;protocol=https'. Unable to fetch URL from any source.
ERROR: dtbtool-native-git-r0 do_fetch: Function failed: base_do_fetch
ERROR: Logfile of failure stored in: /home/test/workspace/yocto/build_bin/tmp/work/i686-linux/dtbtool-native/git-r0/temp/log.do_fetch.22324
ERROR: Task (/home/test/workspace/yocto/meta-swi/meta-swi-mdm9x28/recipes-bsp/dtbtool/dtbtool-native_git.bb:do_fetch) failed with exit code '1'

```

and I added “protocol=https” It seems the same how to I solve it ?

BTW I also got many WARNING like below:

```auto
Now at patch 0001-Adding-MDM-specific-code-under-_PLATFORM_MDM_.patch
WARNING: wpa-supplicant-2.6-r0 do_patch:
Some of the context lines in patches were ignored. This can lead to incorrectly applied patches.
The context lines in the patches can be updated with devtool:

    devtool modify <recipe>
    devtool finish --force-patch-refresh <recipe> <layer_path>

Then the updated patches and the source tree (in devtool's workspace)
should be reviewed to make sure the patches apply in the correct place
and don't introduce duplicate lines (which can, and does happen
when some of the context is ignored). Further information:
http://lists.openembedded.org/pipermail/openembedded-core/2018-March/148675.html
https://bugzilla.yoctoproject.org/show_bug.cgi?id=10450

```

Does this make any difference?

[Next page](https://forum.sierrawireless.com/t/compiler-wp7702-error/29698.md?page=2)