# Command for hold the call

**URL:** <https://forum.sierrawireless.com/t/command-for-hold-the-call/15061>\
**Category:** IoT Modules\
**Created:** [January 16, 2019, 11:41am UTC](https://forum.sierrawireless.com/t/command-for-hold-the-call/15061 "2019-01-16T11:41:03Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![nandikolm](https://avatars.discourse-cdn.com/v4/letter/n/f07891/32.png) [@nandikolm](https://forum.sierrawireless.com/u/nandikolm)\
**Post date:** [January 16, 2019, 11:41am UTC](https://forum.sierrawireless.com/t/command-for-hold-the-call/15061/1 "2019-01-16T11:41:03Z")

</div>

What is command for put the incoming call on hold and release as well. BC127

---

<div class="post-metadata">

**Author:** ![Sierra\_2hufan](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.sierrawireless.com/sierra_2hufan/32/3883_2.png) [@Sierra\_2hufan](https://forum.sierrawireless.com/u/Sierra_2hufan)\
**Post date:** [January 17, 2019, 6:52am UTC](https://forum.sierrawireless.com/t/command-for-hold-the-call/15061/2 "2019-01-17T06:52:26Z")

</div>

HI nandikolm,

Please refer to CALL command under Headset Profile (HSP). The TWC action support by CALL command should be the one you are looking for.

---

<div class="post-metadata">

**Author:** ![nandikolm](https://avatars.discourse-cdn.com/v4/letter/n/f07891/32.png) [@nandikolm](https://forum.sierrawireless.com/u/nandikolm)\
**Post date:** [January 17, 2019, 12:35pm UTC](https://forum.sierrawireless.com/t/command-for-hold-the-call/15061/3 "2019-01-17T12:35:11Z")

</div>

I have tried command “CALL 13 OUTGOING 2” to put a call on hold. to release from the hold “CALL 13 OUTGOING 1”. it is working one time at beginning of after call answered . Second time if you want to put on hold we need to send these command 3 times each then it is working. Kindly let us know the command for putting on call(Incoming /Outgoing call) on hold. And also command for mute the call.

Please do the need full.

Thanks in advance.