# CHG IN Pin current handalling capability

**URL:** <https://forum.sierrawireless.com/t/chg-in-pin-current-handalling-capability/4087>\
**Category:** Legacy AirPrime modules\
**Created:** [January 9, 2010, 2:45pm UTC](https://forum.sierrawireless.com/t/chg-in-pin-current-handalling-capability/4087 "2010-01-09T14:45:43Z")\
**Posts on this page:** 11\
**Page:** 1

<div class="post-metadata">

**Author:** ![asish](https://avatars.discourse-cdn.com/v4/letter/a/3ab097/32.png) [@asish](https://forum.sierrawireless.com/u/asish)\
**Post date:** [January 9, 2010, 2:45pm UTC](https://forum.sierrawireless.com/t/chg-in-pin-current-handalling-capability/4087/1 "2010-01-09T14:45:43Z")

</div>

Hi,  
I want to know if anybody has used to charge battery using a charger gretter than 850mA (as mentioned in PTS of Q2686)…I have a cherger which can provide 3A. What will be the result?

---

<div class="post-metadata">

**Author:** ![davidc](https://avatars.discourse-cdn.com/v4/letter/d/a183cd/32.png) [@davidc](https://forum.sierrawireless.com/u/davidc)\
**Post date:** [January 9, 2010, 11:12pm UTC](https://forum.sierrawireless.com/t/chg-in-pin-current-handalling-capability/4087/2 "2010-01-09T23:12:00Z")

</div>

Hiya,

I have built a power supply to supply 2A to the Li-Ion charging circuit on a Q2686 - all seems to work OK.

However, the Q2686 PTS notes that the charging circuit on the Q2686 ONLY regulates the voltage to the battery, the power supply has to regulate the current. This maximum current is dependant on the battery being used.

ciao, Dave

---

<div class="post-metadata">

**Author:** ![asish](https://avatars.discourse-cdn.com/v4/letter/a/3ab097/32.png) [@asish](https://forum.sierrawireless.com/u/asish)\
**Post date:** [January 10, 2010, 4:17pm UTC](https://forum.sierrawireless.com/t/chg-in-pin-current-handalling-capability/4087/3 "2010-01-10T16:17:38Z")

</div>

Hi ciao,  
Thanks for the reply. I will try with my 3a supply and post the result.

---

<div class="post-metadata">

**Author:** ![awneil](https://avatars.discourse-cdn.com/v4/letter/a/49beb7/32.png) [@awneil](https://forum.sierrawireless.com/u/awneil)\
**Post date:** [January 10, 2010, 10:23pm UTC](https://forum.sierrawireless.com/t/chg-in-pin-current-handalling-capability/4087/4 "2010-01-10T22:23:47Z")

</div>

> [@asish](#):
>
> I will try with my 3a supply and post the result.

Please don’t just “try” ❗😮

Please take great care to ensure that you correctly design your charger to safely charge your battery.

Li-Ion batteries are extremely dangerous when incorrectly charged ❗😮

For example, look at this video: [youtube.com/watch?v=n0M-ZX2DBxY](http://www.youtube.com/watch?v=n0M-ZX2DBxY)

---

<div class="post-metadata">

**Author:** ![ANNAT](https://avatars.discourse-cdn.com/v4/letter/a/898d66/32.png) [@ANNAT](https://forum.sierrawireless.com/u/ANNAT)\
**Post date:** [January 26, 2010, 4:07pm UTC](https://forum.sierrawireless.com/t/chg-in-pin-current-handalling-capability/4087/5 "2010-01-26T16:07:49Z")

</div>

Hi,

I have the same problem. Is there any problem to use an 1A power supplier? because mine is 500mA, and I think it doesn’t work correctly.

Anna

---

<div class="post-metadata">

**Author:** ![ANNAT](https://avatars.discourse-cdn.com/v4/letter/a/898d66/32.png) [@ANNAT](https://forum.sierrawireless.com/u/ANNAT)\
**Post date:** [January 26, 2010, 5:36pm UTC](https://forum.sierrawireless.com/t/chg-in-pin-current-handalling-capability/4087/6 "2010-01-26T17:36:45Z")

</div>

Hi,

I can’t understand what is the function of this charger. First of all, my power supplier in CHR-IN, is Iout=500mA and Vout=5V, but when the module starts the charger, the current is 820mA at 4V. If I connect, another 2.5A power supplier and I don’t limit the current, then the module takes the current it needs, because of my battery is 3.75V an 2.2Ah, it takes 2.5A. Does it mean that the module doesn’t control the charger current?  
Can anybody explain how does it work. Please.  
Hi, I c

---

<div class="post-metadata">

**Author:** ![awneil](https://avatars.discourse-cdn.com/v4/letter/a/49beb7/32.png) [@awneil](https://forum.sierrawireless.com/u/awneil)\
**Post date:** [January 27, 2010, 8:30am UTC](https://forum.sierrawireless.com/t/chg-in-pin-current-handalling-capability/4087/7 "2010-01-27T08:30:59Z")

</div>

> [@ANNAT](#):
>
> I can’t understand what is the function of this charger.

It is clearly described in the Product Technical Specification (PTS):

> [@Q2686 PTS](#):
>
> The two [battery charging] algorithms control a switch, which connects the CHG-IN signal to the VBATT signal. The algorithm controls the frequency and the connected time of the switching.

That’s all it does - just turns the switch ON or OFF:

- When the switch is ON, the power supply (at CHG IN) is, effectively, connected directly to the battery;
- When the switch is OFF, the power supply (at CHG IN) is, effectively, disconnected from the battery.

Clearly, when the switch is ON, it will pass whatever current the power supply can give - that’s why it is essential that the power supply limits its own output current to the maximum value stated!

> [@](#):
>
> Does it mean that the module doesn’t control the charger current?

As stated, it doesn’t control its magnitude - simply switches it ON or OFF.

---

<div class="post-metadata">

**Author:** ![awneil](https://avatars.discourse-cdn.com/v4/letter/a/49beb7/32.png) [@awneil](https://forum.sierrawireless.com/u/awneil)\
**Post date:** [January 27, 2010, 10:05am UTC](https://forum.sierrawireless.com/t/chg-in-pin-current-handalling-capability/4087/8 "2010-01-27T10:05:46Z")

</div>

When designing-in any electronic device, it is always important to carefully study all the documentation provided by the manufacturer!

In addition to the PTS, you also need to study the Wismo Quik Q2686 Customer Design Guidelines:  
Reference : WM\_PRJ\_Q2686\_PTS\_003  
Revision : 003  
Date : February 9th 2006

It clearly illustrates the charging arrangement:  
[attachment=0]Q26 Charging Circuit.gif[/attachment]

---

<div class="post-metadata">

**Author:** ![ANNAT](https://avatars.discourse-cdn.com/v4/letter/a/898d66/32.png) [@ANNAT](https://forum.sierrawireless.com/u/ANNAT)\
**Post date:** [January 27, 2010, 11:24am UTC](https://forum.sierrawireless.com/t/chg-in-pin-current-handalling-capability/4087/9 "2010-01-27T11:24:14Z")

</div>

Sorry but I don’t have this document Q2686 PTS, Ref wm\_prj\_q2686\_pts\_001, Rev 008, 25 Oct 200, I can’t find it in the Wavecom website, and in my supplier. Could you send me the document, please?

Another doubt, is about the charger, I don’t have a AC/DC Charger, because my design is for an AVL, so it’s a car battery connected to the step-down and then to the chg-in, is there any problem with this configuration?

Thank you for your help.

Anna.

---

<div class="post-metadata">

**Author:** ![ANNAT](https://avatars.discourse-cdn.com/v4/letter/a/898d66/32.png) [@ANNAT](https://forum.sierrawireless.com/u/ANNAT)\
**Post date:** [January 27, 2010, 11:26am UTC](https://forum.sierrawireless.com/t/chg-in-pin-current-handalling-capability/4087/10 "2010-01-27T11:26:24Z")

</div>

Ok, I have it.

Thank you.

Anna.

---

<div class="post-metadata">

**Author:** ![awneil](https://avatars.discourse-cdn.com/v4/letter/a/49beb7/32.png) [@awneil](https://forum.sierrawireless.com/u/awneil)\
**Post date:** [January 27, 2010, 11:34am UTC](https://forum.sierrawireless.com/t/chg-in-pin-current-handalling-capability/4087/11 "2010-01-27T11:34:16Z")

</div>

> [@ANNAT](#):
>
> my design is for an AVL

A what ❓

> [@](#):
>
> is there any problem with this configuration?

Not if it meets the stated specifications!

The “configuration” is irrelevant - so long as it meets the stated specifications!

The Q26 (like any other device) neither knows nor cares how you achieve the stated specifications - it just requires that you do meet them ❗
