# Change the settings of UART1

**URL:** <https://forum.sierrawireless.com/t/change-the-settings-of-uart1/3934>\
**Category:** Open AT\
**Created:** [December 2, 2009, 2:05pm UTC](https://forum.sierrawireless.com/t/change-the-settings-of-uart1/3934 "2009-12-02T14:05:14Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![autocon](https://avatars.discourse-cdn.com/v4/letter/a/3be4f8/32.png) [@autocon](https://forum.sierrawireless.com/u/autocon)\
**Post date:** [December 2, 2009, 2:05pm UTC](https://forum.sierrawireless.com/t/change-the-settings-of-uart1/3934/1 "2009-12-02T14:05:14Z")

</div>

hi all

i have problem to change the settings of UART1 from Open AT  
i use R\_73 modem

i try This code but it is not work

s8 a = adl\_atCmdCreate(“AT+IPR=9600”, FALSE, NULL );

please advice

---

<div class="post-metadata">

**Author:** ![awneil](https://avatars.discourse-cdn.com/v4/letter/a/49beb7/32.png) [@awneil](https://forum.sierrawireless.com/u/awneil)\
**Post date:** [December 2, 2009, 2:17pm UTC](https://forum.sierrawireless.com/t/change-the-settings-of-uart1/3934/2 "2009-12-02T14:17:56Z")

</div>

HAve you read - and followed - the notes about changing UART settings in the FCM section of the ADL User Guide… ❓

---

<div class="post-metadata">

**Author:** ![autocon](https://avatars.discourse-cdn.com/v4/letter/a/3be4f8/32.png) [@autocon](https://forum.sierrawireless.com/u/autocon)\
**Post date:** [December 8, 2009, 2:57pm UTC](https://forum.sierrawireless.com/t/change-the-settings-of-uart1/3934/3 "2009-12-08T14:57:47Z")

</div>

Hi awneil

I try to change the uart settingis by use Open Device API but with this I also have a problem with  
uart\_hdl = adl\_OpenDevice( DF\_UART\_CLID, &settings );  
it get stuck in this line and also don’t work

Thanks

Avi
