# Change Static IP in \[Sprint\] 2221 Raven XE...

**URL:** <https://forum.sierrawireless.com/t/change-static-ip-in-sprint-2221-raven-xe/7761>\
**Category:** AirLink routers\
**Created:** [February 16, 2015, 6:57pm UTC](https://forum.sierrawireless.com/t/change-static-ip-in-sprint-2221-raven-xe/7761 "2015-02-16T18:57:02Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![tuesday27](https://avatars.discourse-cdn.com/v4/letter/t/8c91f0/32.png) [@tuesday27](https://forum.sierrawireless.com/u/tuesday27)\
**Post date:** [February 16, 2015, 6:57pm UTC](https://forum.sierrawireless.com/t/change-static-ip-in-sprint-2221-raven-xe/7761/1 "2015-02-16T18:57:02Z")

</div>

My Raven’s Static IP needs to be changed to 0.0.0.0 to allow dynamic ip addresses to be received.  
Does anyone know the specific procedure to change the \*STATICIP parameter via either the AT commands or ACEMANAGER?  
The process is mentioned only topically in the manuals.

Thanks

---

<div class="post-metadata">

**Author:** ![Rex\_alex](https://avatars.discourse-cdn.com/v4/letter/r/73ab20/32.png) [@Rex\_alex](https://forum.sierrawireless.com/u/Rex_alex)\
**Post date:** [February 17, 2015, 9:21am UTC](https://forum.sierrawireless.com/t/change-static-ip-in-sprint-2221-raven-xe/7761/2 "2015-02-17T09:21:13Z")

</div>

hi,  
Did you go through IPsec user guide?

[http://source.sierrawireless.com/resources/airlink/application\_notes\_and\_code\_samples/user\_guide\_ipsec/](http://source.sierrawireless.com/resources/airlink/application_notes_and_code_samples/user_guide_ipsec/)

regards,  
Alex

---

<div class="post-metadata">

**Author:** ![suandmarc](https://avatars.discourse-cdn.com/v4/letter/s/f1d935/32.png) [@suandmarc](https://forum.sierrawireless.com/u/suandmarc)\
**Post date:** [February 17, 2015, 2:38pm UTC](https://forum.sierrawireless.com/t/change-static-ip-in-sprint-2221-raven-xe/7761/3 "2015-02-17T14:38:05Z")

</div>

Alex,  
Thanks for the suggestion.  
Unfortunately, I have not found a workable solution to changing the existing static address which persists  
at 10.95.16.237. Provisioning has no effect on this value since any numbers other than 0.0.0.0 prevents acquisition  
of a fresh ip from the provider [Sprint].  
All of the “reset to factory config…” procedures I have tried do not affect the existing static ip.  
If modification of this parameter requires use of one of the advanced tools such as Wireless Ace  
or the Windows-based AceManager or AceNet, then I am in trouble because I do not have access  
to such utilities (although I have attempted to find them).  
Any additional suggestions will certainly be appreciated…  
Regards