# Bx3105 wifi+Bluetooth **URL:** \ **Category:** Uncategorized\ **Created:** [June 16, 2020, 3:30am UTC](https://forum.sierrawireless.com/t/bx3105-wifi-bluetooth/20634 "2020-06-16T03:30:23Z")\ **Posts on this page:** 8\ **Page:** 1
**Author:** ![kumarasimhan333](https://avatars.discourse-cdn.com/v4/letter/k/85e7bf/32.png) [@kumarasimhan333](https://forum.sierrawireless.com/u/kumarasimhan333)\ **Post date:** [June 16, 2020, 3:30am UTC](https://forum.sierrawireless.com/t/bx3105-wifi-bluetooth/20634/1 "2020-06-16T03:30:23Z")
Hi all, I am using bx3105 Dev kit by Sierra,using that I’m connecting server through wifi,same time I like to print the bill using Bluetooth printer,is it possible to handle wifi and bluetooth at a same time?? Kindly give me suggestions. ---
**Author:** ![Vianney](https://avatars.discourse-cdn.com/v4/letter/v/71e660/32.png) [@Vianney](https://forum.sierrawireless.com/u/Vianney)\ **Post date:** [June 18, 2020, 3:17am UTC](https://forum.sierrawireless.com/t/bx3105-wifi-bluetooth/20634/2 "2020-06-18T03:17:42Z")
Hi @kumarasimhan333, Bx3105 supports Wifi and Bluetooth are active so it is possible to handle them at the same time Please share if you have any concerns and help tick Solution if your question is answered Thanks ---
**Author:** ![kumarasimhan333](https://avatars.discourse-cdn.com/v4/letter/k/85e7bf/32.png) [@kumarasimhan333](https://forum.sierrawireless.com/u/kumarasimhan333)\ **Post date:** [June 18, 2020, 3:21am UTC](https://forum.sierrawireless.com/t/bx3105-wifi-bluetooth/20634/3 "2020-06-18T03:21:25Z")
Our software engineer saying if we want to use blolutooth when it connected to server through wifi,we need to disconnect wifi and only we can perform bluetooth.is it true?? ---
**Author:** ![Vianney](https://avatars.discourse-cdn.com/v4/letter/v/71e660/32.png) [@Vianney](https://forum.sierrawireless.com/u/Vianney)\ **Post date:** [June 18, 2020, 3:47am UTC](https://forum.sierrawireless.com/t/bx3105-wifi-bluetooth/20634/4 "2020-06-18T03:47:02Z")
I have done on Bx3105 with the commands below, my module is currently connected to the phone-1 (via wifi) and phone-2 (via Bluetooth). You can tried on your and share if any concerns > at > OK > at+srbtsystem=3 /// Enable BT system mode BTDM (BLE & BT Classic) > +SRBTC\_IND: 0 > OK > AT+SRBTCPROFILES=7 ////Enable all BTC profiles > +SRBTC\_IND: 12 > +SRBTC\_IND: 9 > +SRBTC\_IND: 5 > OK > AT+SRBTSTATE=1,2 /////Set device to be connectable and general discoverable > OK > at+srbtname? /// Check Local Device’s Bluetooth Name > +SRBTNAME: “BX310x-200AFE” > OK > +SRBTPAIR: “d8:ce:3a:80:8e:df”,1 > +SRBTPAIR: “d8:ce:3a:80:8e:df”,1 > at+srsppcfg=“d8:ce:3a:80:8e:df” ////Establish SPP connection to remote device > +SRBTCFG: 1,0,“d8:ce:3a:80:8e:df”,SPP,0 > OK > at+srsppcnx=1 /////Connect to remote BT device > +SRBTPAIR: “48:2c:a0:0a:55:ad”,1+SRBTCFG: 2,0,“48:2c:a0:0a:55:ad”,SPP,0 > +SRSPPCNX: 2,1,129 > > at+srwcfg=3 ////Configure local device Combined Station + Access Point (Wifi) > OK > > AT+SRWSTACFG=“TheEve”,“conheodethuong”,1 ///Configure information and enable autoconnect > OK > > at+srwstacon=1 ////Connect to access point that has “ssid” = “TheEve” > OK+SRWSTASTATUS: 1,“TheEve”,“4a:2c:a0:d0:55:ad”,6,3,-34+SRWSTAIP: “192.168.43.54”,“255.255.255.0”,“192.168.43.1” Please share any concerns you have ---
**Author:** ![kumarasimhan333](https://avatars.discourse-cdn.com/v4/letter/k/85e7bf/32.png) [@kumarasimhan333](https://forum.sierrawireless.com/u/kumarasimhan333)\ **Post date:** [June 18, 2020, 3:48am UTC](https://forum.sierrawireless.com/t/bx3105-wifi-bluetooth/20634/5 "2020-06-18T03:48:31Z")
Thank you sir I will check with this and will back to you. ---
**Author:** ![kumarasimhan333](https://avatars.discourse-cdn.com/v4/letter/k/85e7bf/32.png) [@kumarasimhan333](https://forum.sierrawireless.com/u/kumarasimhan333)\ **Post date:** [June 19, 2020, 8:21am UTC](https://forum.sierrawireless.com/t/bx3105-wifi-bluetooth/20634/6 "2020-06-19T08:21:11Z")
I discussed with our software engineer,they connect in with server in transperant mode(data mode),so if we want to connect with Bluetooth they need to disconnect from server to switch from data mode to command mode.kindly give your comments on it. ---
**Author:** ![Vianney](https://avatars.discourse-cdn.com/v4/letter/v/71e660/32.png) [@Vianney](https://forum.sierrawireless.com/u/Vianney)\ **Post date:** [July 2, 2020, 2:22am UTC](https://forum.sierrawireless.com/t/bx3105-wifi-bluetooth/20634/8 "2020-07-02T02:22:32Z")
Thanks for your information. I am not sure about your solution (BX3105 connects to server via data mode). But as you said, when the module is in data mode it is limited to do other actions ---
**Author:** ![Adir](https://avatars.discourse-cdn.com/v4/letter/a/e47c2d/32.png) [@Adir](https://forum.sierrawireless.com/u/Adir)\ **Post date:** [June 20, 2022, 9:34am UTC](https://forum.sierrawireless.com/t/bx3105-wifi-bluetooth/20634/9 "2022-06-20T09:34:37Z")
Hello, Are there news informations about using both BL and Wifi simultaneously Thanks