# Build an USERAPP cwe for FX30 4G **URL:** \ **Category:** FX30\ **Created:** [April 29, 2020, 9:51am UTC](https://forum.sierrawireless.com/t/build-an-userapp-cwe-for-fx30-4g/20185 "2020-04-29T09:51:27Z")\ **Posts on this page:** 1\ **Showing post:** 9
**Author:** ![jyijyi](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.sierrawireless.com/jyijyi/32/4766_2.png) [@jyijyi](https://forum.sierrawireless.com/u/jyijyi)\ **Post date:** [January 30, 2023, 3:16pm UTC](https://forum.sierrawireless.com/t/build-an-userapp-cwe-for-fx30-4g/20185/9 "2023-01-30T15:16:46Z")
Can your module enter at!partition command? > [@Repartition wp7702](https://forum.sierrawireless.com/t/repartition-wp7702/22662/2): > > It says “By default, this command is not available. It is only available as a factory (SKU-level) configuration.” Have you tried to enter as the example? AT!PARTITION=0:LEFWKRO,16000 You can also check if the command is already “disable”, if it is disabled, you cannot have partition change: Query List: ATPARTITION=? Purpose: Return the execution command format and the supported parameter values. If !PARTITION is not enabled, the response will include “None/Not Allowed” instead of a list … If it cannot enter this command, you need to contact distributor --- _[View the full topic](https://forum.sierrawireless.com/t/build-an-userapp-cwe-for-fx30-4g/20185)._