# Bridging wlan0 and eth0 with talon WiFi exp IoT module

**URL:** <https://forum.sierrawireless.com/t/bridging-wlan0-and-eth0-with-talon-wifi-exp-iot-module/28702>\
**Category:** Uncategorized\
**Created:** [January 6, 2023, 12:41pm UTC](https://forum.sierrawireless.com/t/bridging-wlan0-and-eth0-with-talon-wifi-exp-iot-module/28702 "2023-01-06T12:41:46Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![ccu](https://avatars.discourse-cdn.com/v4/letter/c/f17d59/32.png) [@ccu](https://forum.sierrawireless.com/u/ccu)\
**Post date:** [January 6, 2023, 12:41pm UTC](https://forum.sierrawireless.com/t/bridging-wlan0-and-eth0-with-talon-wifi-exp-iot-module/28702/1 "2023-01-06T12:41:46Z")

</div>

We are trying to bridge eth0 and wlan0 with the new release of the FX30 firmware but I am having some problems. First of all this is working fine with the R14, we can add the wlan0 and eth0 to br0 bridge and then remove the routes for wlan0 and eth0. Now the two interfaces are bridged together on 192.168.0.0/24 subnet.

With the R15 release instead, we can still bring up the wlan0 and to add it to the br0 together with eth0, but then we lose connectivity with both interfaces.

We have one client connected on the wired interface and one on he wireless interface, they will need to exchange data and are working on the same subnet, I did add a topic on the legato forum but this seems more related with the R15 release and so possibly fitting better here?

> **[Wifi exp board on legato21 (R15)](https://forum.legato.io/t/wifi-exp-board-on-legato21-r15/6333/46)**
>
> the wlan0 and eth0 are added to the bridge with the same method, this works fine as once this is done I can ping the client connected on the ethernet interface by the client connected over wifi. I don\`t think the problem with the legato framework,...
