# Beginner in the world of GSM modems, questions for Open AT

**URL:** <https://forum.sierrawireless.com/t/beginner-in-the-world-of-gsm-modems-questions-for-open-at/4811>\
**Category:** Open AT\
**Created:** [January 6, 2011, 5:18pm UTC](https://forum.sierrawireless.com/t/beginner-in-the-world-of-gsm-modems-questions-for-open-at/4811 "2011-01-06T17:18:47Z")\
**Posts on this page:** 1\
**Showing post:** 1

<div class="post-metadata">

**Author:** ![georgia](https://avatars.discourse-cdn.com/v4/letter/g/77aa72/32.png) [@georgia](https://forum.sierrawireless.com/u/georgia)\
**Post date:** [January 6, 2011, 5:18pm UTC](https://forum.sierrawireless.com/t/beginner-in-the-world-of-gsm-modems-questions-for-open-at/4811/1 "2011-01-06T17:18:47Z")

</div>

Hello,

I want to develop the following system:  
I must connect the C8051F320 microcontroller [http://www.silabs.com/pages/DownloadDoc.aspx?FILEURL=Support%20Documents/TechnicalDocs/C8051F32x.pdf&src=ProductMatrix](http://www.silabs.com/pages/DownloadDoc.aspx?FILEURL=Support%20Documents/TechnicalDocs/C8051F32x.pdf&src=ProductMatrix) (which is on development kit C8051F32x-DK [http://www.silabs.com/pages/DownloadDoc.aspx?FILEURL=Support%20Documents/TechnicalDocs/C8051F32x-DK.pdf&src=SupportDocLibrary](http://www.silabs.com/pages/DownloadDoc.aspx?FILEURL=Support%20Documents/TechnicalDocs/C8051F32x-DK.pdf&src=SupportDocLibrary) ) with the GSM modem 13006b [http://www.radel.gr/radel\_modems.html](http://www.radel.gr/radel_modems.html), through one serial cable (handmade:9pins to 15pins).

The microcontroller should send data to the GSM modem using the serial cable. Then the GSM modem sends the data to a web server (which I’ve set up) trough a TCP/IP socket (using GPRS network).

It’s the first time I’m trying to use GSM modem, so it’s very difficult for me to understand what I should do.

For the moment I’m trying to familiarize with the modem. I connected my PC (Windows 7, 64bit) with the modem, I used the program hercules (3.2.3) and send AT commands to the modem. When I tried to communicate with the web server (with AT commands) I couldn’t do it. After searching internet I read that I can’t do that with AT commands (with my modem). I also read that the easiest way is to communicate with a web server through a TCP/IP socket is to use Open AT. How can I do that? I have to install anything at the modem?  
Is the above system realistic? Or I should try to send SMS?

---

_[View the full topic](https://forum.sierrawireless.com/t/beginner-in-the-world-of-gsm-modems-questions-for-open-at/4811)._
