# BC127 Test mode

**URL:** <https://forum.sierrawireless.com/t/bc127-test-mode/12634>\
**Category:** WiFi and Bluetooth Modules\
**Created:** [May 14, 2018, 7:24am UTC](https://forum.sierrawireless.com/t/bc127-test-mode/12634 "2018-05-14T07:24:50Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![nir76](https://avatars.discourse-cdn.com/v4/letter/n/ecb155/32.png) [@nir76](https://forum.sierrawireless.com/u/nir76)\
**Post date:** [May 14, 2018, 7:24am UTC](https://forum.sierrawireless.com/t/bc127-test-mode/12634/1 "2018-05-14T07:24:51Z")

</div>

Hello all,

As part of our evaluation test:

Does the BC127 has a “test mode” that can perform - for example, a CW transmission at a frequency which I choose, and a RX BER test etc’…

Thanks,  
Nir

---

<div class="post-metadata">

**Author:** ![mlw](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.sierrawireless.com/mlw/32/3706_2.png) [@mlw](https://forum.sierrawireless.com/u/mlw)\
**Post date:** [May 14, 2018, 7:42am UTC](https://forum.sierrawireless.com/t/bc127-test-mode/12634/2 "2018-05-14T07:42:30Z")

</div>

Nir,

There are a couple of way to do this but the first question is, is this for production testing or generic product design test?

Unfortunately its not as simple as sending a couple of commands to the unit (a requirement that has been captured for future products). I have attached a document below which describes one of the methods, note the comment about us delivering bluetest3 under NDA is not correct as it is not our software to give out.  
[9eda7bcc261632ecb678c30e51b7f8933e17685f.pdf](https://forum.sierrawireless.com/uploads/short-url/mFhxqStpfTbe66NEWvjY41GbSqj.pdf) (233.0 KB)

Regards

Matt

---

<div class="post-metadata">

**Author:** ![nir76](https://avatars.discourse-cdn.com/v4/letter/n/ecb155/32.png) [@nir76](https://forum.sierrawireless.com/u/nir76)\
**Post date:** [May 14, 2018, 9:26am UTC](https://forum.sierrawireless.com/t/bc127-test-mode/12634/3 "2018-05-14T09:26:48Z")

</div>

Hi Matt,

Thanks for your quick response 🙂  
The tests will serve us at production stage.  
I have bluetest software from previous projects…  
I followed the instructions on the page you attached…works perfectly - just what I needed!

Thanks again for your kind help.  
Nir
