# BC127 pairing with car (16 digit PIN)

**URL:** <https://forum.sierrawireless.com/t/bc127-pairing-with-car-16-digit-pin/14360>\
**Category:** WiFi and Bluetooth Modules\
**Created:** [November 2, 2018, 5:16pm UTC](https://forum.sierrawireless.com/t/bc127-pairing-with-car-16-digit-pin/14360 "2018-11-02T17:16:21Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![chris3](https://avatars.discourse-cdn.com/v4/letter/c/65b543/32.png) [@chris3](https://forum.sierrawireless.com/u/chris3)\
**Post date:** [November 2, 2018, 5:16pm UTC](https://forum.sierrawireless.com/t/bc127-pairing-with-car-16-digit-pin/14360/1 "2018-11-02T17:16:21Z")

</div>

Hi,

I am trying to open an AGHFP connection with my BC127 DISKIT to a Skoda Octavia (2011) with the stock radio (Columbus). Firmware is the latest Melody version, 7.2, Build 1534785311.  
But I already fail when trying to pair with the car. In another car (Kenwood radio), pairing and AGHFP work fine, there is no need for confirming a PIN.

1. Pairing initiated by the car  
The car finds the BT module, but quickly after showing the 16 digit PIN, it immediately cancels the pairing process. The BT module stays in state PAIR\_PENDING. No PAIR\_PASSKEY notification is shown, no matter which SSP\_CAPS setting (0,1,2,3,4,5) is used.  
Is a 16 digit PIN even supported by Melody?

2. Pairing initiated by BC127  
When initiating the pairing progress through the BC127, the car shows the PIN input prompt. But when I enter 0000, the UART prompt shows PAIR\_ERROR and aborts. (PIN=0000 on the BC127).

Is there anything I am missing?

Here is the configuration:

> config  
> AUDIO=0 0  
> AUDIO\_ANALOG=15 15 1 OFF  
> AUDIO\_DIGITAL=0 44100 64 100A00 OFF  
> AUTOCONN=0  
> AUTO\_DATA=OFF OFF  
> BALANCE=100 100  
> BATT\_CONFIG=OFF 145 4250 1500 150  
> BC\_SMART\_CONFIG=68E3 28F0 89F7 D93C ON  
> BEACON\_DATA=0 00 11 22 33 44 55 66 77 88 99 AA BB CC DD EE FF 04 D2 16 2E EE  
> BLE\_CONFIG=0 OFF 80 ON  
> BLE\_CONN\_PARAMS=128 12 24 40 0 400 100 400 400 64 400 400  
> BT\_STATE\_CONFIG=1 1  
> BT\_VOL\_CONFIG=A 60 10 1  
> CLASS\_1=OFF  
> CMD\_TO=20  
> COD=5A020C  
> CODEC=0 OFF  
> DEEP\_SLEEP=OFF  
> DEVICE\_ID=0001 0002 0003 0004 0005 0006 0007 0008  
> ENABLE\_BATT\_IND=ON  
> ENABLE\_LED=ON  
> ENABLE\_SPP\_SNIFF=OFF 0 0 0 0 0  
> GPIO\_CONFIG=ON 0  
> HFP\_CONFIG=OFF ON OFF OFF OFF OFF  
> HIGH\_SPEED=OFF OFF  
> LOCAL\_ADDR=20FABB0A003F 000000000000  
> MAX\_REC=2  
> MM=OFF OFF 0 OFF OFF OFF OFF OFF  
> MUSIC\_META\_DATA=OFF  
> MUSIC\_OLD\_AVRCP=OFF  
> NAME=test  
> NAME\_SHORT=BC0A003F  
> PIN=0000  
> PROFILES=0 1 0 1 1 0 0 1 0 0 0 0  
> REMOTE\_ADDR=000000000000  
> SPP\_UUID=00 00 11 01 00 00 10 00 80 00 00 80 5F 9B 34 FB  
> SSP\_CAPS=3  
> TWS\_CONFIG=OFF 1 2  
> UART\_CONFIG=9600 OFF 0  
> USB\_HOST=OFF  
> VREG\_ROLE=1  
> OK

Every help is appreciated, thank you in advance!

---

<div class="post-metadata">

**Author:** ![bluemaker](https://avatars.discourse-cdn.com/v4/letter/b/8baadc/32.png) [@bluemaker](https://forum.sierrawireless.com/u/bluemaker)\
**Post date:** [November 5, 2018, 6:08am UTC](https://forum.sierrawireless.com/t/bc127-pairing-with-car-16-digit-pin/14360/2 "2018-11-05T06:08:27Z")

</div>

Hi.  
I also have similar symptoms in the Renault model.  
(All device settings are the same as above.)

The following message is displayed.

Bluetooth authorization failed  
The passkey you entered is wrong  
Try the authorization process again.

Does anyone fix this problem?

---

<div class="post-metadata">

**Author:** ![bte](https://avatars.discourse-cdn.com/v4/letter/b/b5e925/32.png) [@bte](https://forum.sierrawireless.com/u/bte)\
**Post date:** [January 17, 2019, 8:51pm UTC](https://forum.sierrawireless.com/t/bc127-pairing-with-car-16-digit-pin/14360/3 "2019-01-17T20:51:39Z")

</div>

16 Digit PIN is now availability in Melody 7.3 firmware. Please contact your Sierra Wireless distributor or support contact for the firmware.
