# BC127 half-duplex issue in telephony

**URL:** <https://forum.sierrawireless.com/t/bc127-half-duplex-issue-in-telephony/25989>\
**Category:** WiFi and Bluetooth Modules\
**Created:** [January 17, 2022, 3:53pm UTC](https://forum.sierrawireless.com/t/bc127-half-duplex-issue-in-telephony/25989 "2022-01-17T15:53:43Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![ericbenhaim](https://avatars.discourse-cdn.com/v4/letter/e/9de0a6/32.png) [@ericbenhaim](https://forum.sierrawireless.com/u/ericbenhaim)\
**Post date:** [January 17, 2022, 3:53pm UTC](https://forum.sierrawireless.com/t/bc127-half-duplex-issue-in-telephony/25989/1 "2022-01-17T15:53:43Z")

</div>

Hi Sierra team,

I encountered an critical issue during a phone call (HFP) using the BC127 module.

Sometimes quickly after the start of the call, the communication goes from full-duplex to half-duplex i.e. when other people are talking they are not able to hear my voice anymore and I cannot interrupt them.

I tried several tests and it appears that this is cause by the bluetooth chipset itself : I am using CVC algorithm on this platform. I disabled almost all blocks in CVC processing but the problem remains. Still it is sometimes hard to reproduce. Have you ever had this kind of problem ? I would really appreciate your support.

Please find below my melody version and config.

![image](https://us1.discourse-cdn.com/flex025/uploads/sierrawireless/original/2X/d/d8eab7c7568b407ad61af84697ae7ecf4e840e9b.png)

 ![image](https://us1.discourse-cdn.com/flex025/uploads/sierrawireless/original/2X/0/0ca70da837b10c062a6349a9350164f9e4248e6d.png)

---

<div class="post-metadata">

**Author:** ![mlw](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.sierrawireless.com/mlw/32/3706_2.png) [@mlw](https://forum.sierrawireless.com/u/mlw)\
**Post date:** [January 19, 2022, 1:47pm UTC](https://forum.sierrawireless.com/t/bc127-half-duplex-issue-in-telephony/25989/2 "2022-01-19T13:47:18Z")

</div>

@ericbenhaim

Generically speaking half duplex is not an issue that has been reported to us and the 7.3 firmware has been our for 3 years or so, as a result it may be specific to your scenario/device.

Regards

Matt

---

<div class="post-metadata">

**Author:** ![ericbenhaim](https://avatars.discourse-cdn.com/v4/letter/e/9de0a6/32.png) [@ericbenhaim](https://forum.sierrawireless.com/u/ericbenhaim)\
**Post date:** [January 19, 2022, 5:24pm UTC](https://forum.sierrawireless.com/t/bc127-half-duplex-issue-in-telephony/25989/3 "2022-01-19T17:24:13Z")

</div>

Hi Matt

The BC127 board is connected to my android phone which I use to make the phone call.  
During the call when I switch from BC127 to my phone I don’t have any issue.  
Switching back to BC127 causes the half-duplex behavior, so I am confident the problem comes from the board configuration (or negotiation between board and phone?)  
Any idea how to investigate this ?

Thanks,  
Eric

---

<div class="post-metadata">

**Author:** ![mlw](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.sierrawireless.com/mlw/32/3706_2.png) [@mlw](https://forum.sierrawireless.com/u/mlw)\
**Post date:** [January 20, 2022, 3:00pm UTC](https://forum.sierrawireless.com/t/bc127-half-duplex-issue-in-telephony/25989/4 "2022-01-20T15:00:15Z")

</div>

@ericbenhaim

So to be clear what you are doing is as follows

- Connect the BC127 with an Android phone over Bluetooth.
- Place a call with the phone.
- When the call is connected you have bi directional audio with the audio coming out of the BC127.
- Switch the audio to come out of the handset, again bi directional audio.
- Switch it back to the BC127 and it is half duplex?

Does it do this with an iPhone?

Regards

Matt

---

<div class="post-metadata">

**Author:** ![ericbenhaim](https://avatars.discourse-cdn.com/v4/letter/e/9de0a6/32.png) [@ericbenhaim](https://forum.sierrawireless.com/u/ericbenhaim)\
**Post date:** [January 21, 2022, 8:48am UTC](https://forum.sierrawireless.com/t/bc127-half-duplex-issue-in-telephony/25989/5 "2022-01-21T08:48:45Z")

</div>

Hi Matt,

BC127 is used as the headset.  
I already tried with several host devices and succeed to reproduce the half-duplex issue.

- Laptop using Teams on windows 10
- Laptop using Discord on windows 10
- Android phone
- iPhone

Here is the sequence :

- Connect BC127 to host device
- Init a call (phone call, teams meetings, …)
- Call is connected with full-duplex in/out of the BC127
- It happens that when the remote caller talks I can’t talk at the same time : half-duplex
- Switch the audio to come out of the handset or laptop, again bi directional audio.
- Switch to a bluetooth headset, still bi directional audio
- Switch back to the BC127, it is half duplex.

Thanks,  
Eric
