# BC127 available after disconnect

**URL:** <https://forum.sierrawireless.com/t/bc127-available-after-disconnect/20661>\
**Category:** WiFi and Bluetooth Modules\
**Created:** [June 18, 2020, 3:11am UTC](https://forum.sierrawireless.com/t/bc127-available-after-disconnect/20661 "2020-06-18T03:11:17Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![tommy](https://avatars.discourse-cdn.com/v4/letter/t/b5a626/32.png) [@tommy](https://forum.sierrawireless.com/u/tommy)\
**Post date:** [June 18, 2020, 3:11am UTC](https://forum.sierrawireless.com/t/bc127-available-after-disconnect/20661/1 "2020-06-18T03:11:17Z")

</div>

I’m testing a BC127 and find that I can connect with my phone over BT Classic; then, when I disconnect, the device doesn’t go back into discoverable / pairable mode. I can’t seem to find how to do that.

---

<div class="post-metadata">

**Author:** ![mlw](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.sierrawireless.com/mlw/32/3706_2.png) [@mlw](https://forum.sierrawireless.com/u/mlw)\
**Post date:** [June 18, 2020, 7:20am UTC](https://forum.sierrawireless.com/t/bc127-available-after-disconnect/20661/2 "2020-06-18T07:20:57Z")

</div>

@tommy

Always good to state the fiormware version you are using but assuming 7.x, if you set

`bt_state_config=1 1`

Then it is always connectable and discoverable.

Regards

Matt

---

<div class="post-metadata">

**Author:** ![tommy](https://avatars.discourse-cdn.com/v4/letter/t/b5a626/32.png) [@tommy](https://forum.sierrawireless.com/u/tommy)\
**Post date:** [June 18, 2020, 1:32pm UTC](https://forum.sierrawireless.com/t/bc127-available-after-disconnect/20661/3 "2020-06-18T13:32:27Z")

</div>

Sorry – yes, latest firmware:

---

<div class="post-metadata">

**Author:** ![tommy](https://avatars.discourse-cdn.com/v4/letter/t/b5a626/32.png) [@tommy](https://forum.sierrawireless.com/u/tommy)\
**Post date:** [June 18, 2020, 3:32pm UTC](https://forum.sierrawireless.com/t/bc127-available-after-disconnect/20661/4 "2020-06-18T15:32:22Z")

</div>

Sierra Wireless Copyright 2018

Melody Audio V7.3 HD

Build: 1544717993

Bluetooth addresses: 20FABB09B617 48FC9C5F9C98

Profiles: A2DP AVRCP HFP BLE SPP PBAP MAP TWS

Codecs: SBC APTX APTX-HD

It’s still acting a bit weird. I’ll do some testing and get back to you.

Thanks!

Tommy