# BC127 A2DP Sink and Source Confusion

**URL:** <https://forum.sierrawireless.com/t/bc127-a2dp-sink-and-source-confusion/13109>\
**Category:** WiFi and Bluetooth Modules\
**Created:** [July 9, 2018, 5:07pm UTC](https://forum.sierrawireless.com/t/bc127-a2dp-sink-and-source-confusion/13109 "2018-07-09T17:07:47Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![swhitaker](https://avatars.discourse-cdn.com/v4/letter/s/59ef9b/32.png) [@swhitaker](https://forum.sierrawireless.com/u/swhitaker)\
**Post date:** [July 9, 2018, 5:07pm UTC](https://forum.sierrawireless.com/t/bc127-a2dp-sink-and-source-confusion/13109/1 "2018-07-09T17:07:47Z")

</div>

Hello,

I seem to be having a misunderstanding of the BC127 module or possibly just Bluetooth in general.

I would like to have the BC127 be a central hub for multiple Bluetooth speakers and a single phone connection and stream music from one phone to multiple Bluetooth speakers. Right now, I am trying to route the phone’s A2DP to the wireless speaker and I am having issues with this.

I can connect from my phone to the speaker without any problem and stream music to this speaker via Bluetooth without any problem.

In my log below, I have the BC127 auto-connecting and auto-advertising itself so I can speed up the process when I reset the module. I check the status and show my config too.

> reset
> 
> Sierra Wireless Copyright 2018  
> Melody Audio V7.1  
> Build: 1526921906  
> Ready  
> OPEN\_OK 10 A2DP 643409240349  
> OPEN\_OK 11 AVRCP 643409240349  
> OPEN\_OK 20 A2DP 84119E71A98C  
> OPEN\_OK 21 AVRCP 84119E71A98C  
> AVRCP\_PAUSE 21  
> AVRCP\_STOP 21  
> OPEN\_OK 23 HFP 84119E71A98C
> 
> status
> 
> STATE CONNECTED[2] CONNECTABLE[OFF] DISCOVERABLE[OFF] BLE[IDLE]  
> LINK 10 CONNECTED A2DP 643409240349 SUSPENDED SBC SRC 48000  
> LINK 11 CONNECTED AVRCP 643409240349 STOPPED  
> LINK 20 CONNECTED A2DP 84119E71A98C SUSPENDED SBC SNK 44100  
> LINK 21 CONNECTED AVRCP 84119E71A98C STOPPED  
> LINK 23 CONNECTED HFP 84119E71A98C IDLE NB  
> OK
> 
> route 10
> 
> OK  
> A2DP\_STREAM\_START 20  
> AVRCP\_PLAY 21  
> AVRCP\_PAUSE 21  
> A2DP\_STREAM\_SUSPEND 20

> config
> 
> AUDIO=0 0  
> AUDIO\_ANALOG=15 15 1 OFF  
> AUDIO\_DIGITAL=0 44100 64 100A00 OFF  
> AUTOCONN=1  
> AUTO\_DATA=OFF OFF  
> BALANCE=100 100  
> BATT\_CONFIG=OFF 145 4250 1500 150  
> BC\_SMART\_CONFIG=68E3 28F0 89F7 D93C ON  
> BEACON\_DATA=0 00 11 22 33 44 55 66 77 88 99 AA BB CC DD EE FF 04 D2 16 2E EE  
> BLE\_CONFIG=0 ON 80 ON  
> BLE\_CONN\_PARAMS=128 12 24 40 0 400 100 400 400 64 400 400  
> BT\_STATE\_CONFIG=0 0  
> BT\_VOL\_CONFIG=A 60 10 1  
> CLASS\_1=OFF  
> CMD\_TO=20  
> COD=240404  
> CODEC=0 OFF  
> DEEP\_SLEEP=OFF  
> DEVICE\_ID=0001 0002 0003 0004 0005 0006 0007 0008  
> ENABLE\_BATT\_IND=ON  
> ENABLE\_LED=ON  
> ENABLE\_SPP\_SNIFF=OFF 0 0 0 0 0  
> GPIO\_CONFIG=ON 0  
> HFP\_CONFIG=OFF ON OFF OFF OFF OFF  
> HIGH\_SPEED=OFF OFF  
> LOCAL\_ADDR=20FABB088DFA 4176FFB762C0  
> MAX\_REC=2  
> MM=OFF OFF 0 OFF OFF OFF OFF OFF  
> MUSIC\_META\_DATA=ON  
> MUSIC\_OLD\_AVRCP=OFF  
> NAME=BC127  
> NAME\_SHORT=BC088DFA  
> PIN=0000  
> PROFILES=2 0 2 0 2 3 2 1 0 0 2 0  
> REMOTE\_ADDR=000000000000  
> SPP\_UUID=00 00 11 01 00 00 10 00 80 00 00 80 5F 9B 34 FB  
> SSP\_CAPS=3  
> TWS\_CONFIG=OFF 1 2  
> UART\_CONFIG=9600 OFF 0  
> USB\_HOST=OFF  
> VREG\_ROLE=1  
> OK

I have noticed that the frequency of the speaker and the phone are different for A2DP communication. Will this affect anything?

I also notice that my phone is labeled as a sink and the speaker is labeled as a source. Presently I feel that this is the issue. How could this be changed?

Is there anything else that I am missing that could cause an issue?

Thanks,  
Steven.
