# Automatic gprs-session parking when audio call is incoming?

**URL:** <https://forum.sierrawireless.com/t/automatic-gprs-session-parking-when-audio-call-is-incoming/4475>\
**Category:** Open AT\
**Created:** [June 7, 2010, 1:43pm UTC](https://forum.sierrawireless.com/t/automatic-gprs-session-parking-when-audio-call-is-incoming/4475 "2010-06-07T13:43:55Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![phrozzy](https://avatars.discourse-cdn.com/v4/letter/p/2bfe46/32.png) [@phrozzy](https://forum.sierrawireless.com/u/phrozzy)\
**Post date:** [June 7, 2010, 1:43pm UTC](https://forum.sierrawireless.com/t/automatic-gprs-session-parking-when-audio-call-is-incoming/4475/1 "2010-06-07T13:43:55Z")

</div>

There is some AT commands to instruct the Q2686 to perform an automatic gprs-session parking when an inbound call is incoming ? My app on fastrack xtend doesn’t give priority to audio call when a gprs socket is connected… why ?

---

<div class="post-metadata">

**Author:** ![awneil](https://avatars.discourse-cdn.com/v4/letter/a/49beb7/32.png) [@awneil](https://forum.sierrawireless.com/u/awneil)\
**Post date:** [June 7, 2010, 3:10pm UTC](https://forum.sierrawireless.com/t/automatic-gprs-session-parking-when-audio-call-is-incoming/4475/2 "2010-06-07T15:10:13Z")

</div>

[https://forum.sierrawireless.com/t/intercept-incoming-voice-call-during-gprs-session/4447/7](https://forum.sierrawireless.com/t/intercept-incoming-voice-call-during-gprs-session/4447/7)

---

<div class="post-metadata">

**Author:** ![phrozzy](https://avatars.discourse-cdn.com/v4/letter/p/2bfe46/32.png) [@phrozzy](https://forum.sierrawireless.com/u/phrozzy)\
**Post date:** [June 8, 2010, 9:11am UTC](https://forum.sierrawireless.com/t/automatic-gprs-session-parking-when-audio-call-is-incoming/4475/3 "2010-06-08T09:11:38Z")

</div>

AT+WBHV=7,1 responds “ERROR” on FastTrack XTend. Why ?

```auto
AT+WBHV=7,1
ERROR
AT+WBHV=?
+WBHV: 0,(0-1)
+WBHV: 1,(0-2)
+WBHV: 2,(0-1)
+WBHV: 3,(0-1),(0-1)
+WBHV: 4,(0-1)
+WBHV: 5,(0-1)
+WBHV: 6,(1-255),(10-2550)
+WBHV: 8,(0-1)
+WBHV: 9,(0-1)
OK
```

Param 7 isn’t supported.