# AT command to read MCC/MNC on EM7455

**URL:** <https://forum.sierrawireless.com/t/at-command-to-read-mcc-mnc-on-em7455/21679>\
**Category:** Uncategorized\
**Created:** [October 2, 2020, 6:11am UTC](https://forum.sierrawireless.com/t/at-command-to-read-mcc-mnc-on-em7455/21679 "2020-10-02T06:11:42Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![akn](https://avatars.discourse-cdn.com/v4/letter/a/f17d59/32.png) [@akn](https://forum.sierrawireless.com/u/akn)\
**Post date:** [October 2, 2020, 6:11am UTC](https://forum.sierrawireless.com/t/at-command-to-read-mcc-mnc-on-em7455/21679/1 "2020-10-02T06:11:42Z")

</div>

What are the AT commands to read the MCC/MNC ID?

I have tried AT!NVPLMN? and AT!LTEINFO, but both of these commands depend upon the SIM registration. I am looking for an AT command that will read MCC and MNC ID directly from the SIM.

AT!NVPLMN?  
MCC MNC  
??? ???

OK  
AT!LTEINFO  
!LTEINFO: Not Available

OK  
AT!GSTATUS?  
!GSTATUS:  
Current Time: 5672 Temperature: 36  
Reset Counter: 2 Mode: ONLINE  
System mode: WCDMA PS state: Not attached  
WCDMA band: WCDMA 850  
WCDMA channel: 4385  
GMM (PS) state:NULL —  
MM (CS) state: IDLE LIMITED SERVICE

WCDMA L1 state:L1M\_PCH\_SLEEP LAC: D8F1 (55537)  
RRC state: DISCONNECTED UTRAN Cell ID: 03518F7B (55676795)  
RxM RSSI C0: -96 RxD RSSI C0: —  
RxM RSSI C1: — RxD RSSI C1: —

OK

---

<div class="post-metadata">

**Author:** ![Donald](https://avatars.discourse-cdn.com/v4/letter/d/ac8455/32.png) [@Donald](https://forum.sierrawireless.com/u/Donald)\
**Post date:** [October 2, 2020, 6:45am UTC](https://forum.sierrawireless.com/t/at-command-to-read-mcc-mnc-on-em7455/21679/2 "2020-10-02T06:45:47Z")

</div>

Hi @akn

You can use AT+CIMI command to read MCC and MNC ID directly from the SIM.

Example: AT+CIMI  
452050404962614  
OK

MCC:452, MNC: 05

Please help to tick “Solution” if your question is answered.